BUG: Read using "Utility" reverts to normal read when using multiple passes...

Moderators: Filipp_TS, Alex_TS

User avatar
300ddr
User
Posts: 221
Joined: 18.01.12
Reputation: 2 / (24)

BUG: Read using "Utility" reverts to normal read when using multiple passes...

Postby 300ddr » 07.02.18, 03:40

This applies to Toshiba drives with glist corruption when you can only read using utility.

Read using "Utility" with glist fix works when checking LBA in Toshiba utility. It also works in DE when setup in a single Configuration (and works for something like scanning MFT using current read settings).

But, if you use multiple passes in DE (like I do), then the "Utility" read option doesn't stick. It reverts to "use hardware retries" and sectors are "green" instead of "orange" (and... corrupt).


gord
Newbie
Posts: 6
Joined: 07.03.08
Reputation: 0 / (3)

Re: BUG: Read using "Utility" reverts to normal read when using multiple passes...

Postby gord » 07.02.18, 23:04

Hello
I have just finished a Toshiba same problem, please looking in to this bug. lots of time wasted.


gord
Newbie
Posts: 6
Joined: 07.03.08
Reputation: 0 / (3)

Re: BUG: Read using "Utility" reverts to normal read when using multiple passes...

Postby gord » 07.02.18, 23:11

Hello,

Not sure maybe me but newest update bugs/and glitches even when going back to tasked setting not same ( it happened scanned MFT and partition closed task to use next day. Reopen sand scans gone. strange..... anyone else...

User avatar
300ddr
User
Posts: 221
Joined: 18.01.12
Reputation: 2 / (24)

Re: BUG: Read using "Utility" reverts to normal read when using multiple passes...

Postby 300ddr » 07.02.18, 23:27

Haven't experienced that.

User avatar
Filipp_TS
Site Admin
Posts: 206
Joined: 15.04.13
Reputation: 9 / (87)

Re: BUG: Read using "Utility" reverts to normal read when using multiple passes...

Postby Filipp_TS » 20.02.18, 16:01

Hi all,

"multiple passes" option doesn't support Active utility reading mode.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com

User avatar
Amarbir[CDR-Labs]
Advanced user
Posts: 664
Joined: 03.08.09
Reputation: 6 / (63)

Re: BUG: Read using "Utility" reverts to normal read when using multiple passes...

Postby Amarbir[CDR-Labs] » 25.02.18, 10:47

Filipp_TS wrote:Source of the post Hi all,

"multiple passes" option doesn't support Active utility reading mode.


Well,
If it can be implemented for single pass it can be done for multiple passes too ,Its just some programming effort and can be surely done .
Regards
Amarbir S Dhillon ,CDR Labs [ Chandigarh ,India ]
DataRecovery - The Affordable Way In India
Visit - > http://www.chandigarhdatarecovery.com My Facebook - > https://www.facebook.com/chandigarhdatarecovery


Return to “Toshiba native”

Who is online

Users browsing this forum: No registered users and 1 guest