Rosewood ST1000LM035-Sysfile Write Eror

Moderator: Dmitriy_TS


AYNIADAM
Newbie
Posts: 7
Joined: 23.01.13
Reputation: 1 / (5)

Rosewood ST1000LM035-Sysfile Write Eror

Postby AYNIADAM » 04.09.17, 13:33

Hi.
I have ST1000LM035 Seagate disc.

We are getting an MCMT error on the disk.
We are following this procedure first because this serade terminal is locked. : http://blog.acelaboratory.com/pc-3000-for-hdd-seagate-f3-unlocking-the-rosewood-drives.html
After the terminal is turned on, we apply the MCMT problem resolution procedure: http://blog.acelaboratory.com/pc-3000-for-hdd-seagate-f3-mcmtfilehandler-exception-failed-mcmt-read-request-error-and-how-to-fix-it.html
But the Sysfile write operation does not work. There is no problem in reading, it is getting error in writing.

Is there a solution?
Attachments
Screenshot_3.jpg
Screenshot_3.jpg (5.91 KiB) Viewed 1277 times


Dmitriy_TS
Site Admin
Posts: 233
Joined: 01.04.13
Reputation: 7 / (67)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby Dmitriy_TS » 20.09.17, 19:49

Dear AYNIADAM,

Try to write the system file via ATA indirect.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


AYNIADAM
Newbie
Posts: 7
Joined: 23.01.13
Reputation: 1 / (5)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby AYNIADAM » 28.09.17, 11:19

"MCMT table is corrupted" I am rewriting the 346 file to resolve this error, but it is not resolved.

Code: Select all

Boot 0x80M
Tech Unlock Handshake: 0xB5107352
Reply:

QB
Rst 0x80MSrv DETCR init 0x0000
(P) SATA Reset

RAW OFF
 PASS
(DOS Table) Worst Count: 00000C40 At SU: 000CC42A NT: 00000000 OT: 00000003
 MCMT table is corrupted
 MCMT table is corrupted
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC
 MCMT table is corrupted
 MCMT table is corrupted


AYNIADAM
Newbie
Posts: 7
Joined: 23.01.13
Reputation: 1 / (5)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby AYNIADAM » 28.09.17, 13:12

Problem is solved. There was a different solution for MCMT failure.


remrsystems
Newbie
Posts: 1
Joined: 09.08.17
Reputation: 0 / (1)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby remrsystems » 02.10.17, 13:26

Hello Ayniadam,
After unlocking the Rosewood ST2000LM007, The terminal Error is MCMT table is corrupted. any solution for this.
Attachments
MCMT Error.PNG
MCMT Error.PNG (17.47 KiB) Viewed 1023 times

User avatar
300ddr
New user
Posts: 198
Joined: 18.01.12
Reputation: 2 / (21)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby 300ddr » 05.10.17, 04:00

@AYNIADAM Can you share the solution you used please?
Thank you,
Brian


Masterclass
Newbie
Posts: 18
Joined: 27.12.16
Reputation: 2 / (16)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby Masterclass » 05.10.17, 11:12

AYNIADAM wrote:Source of the post Problem is solved.

I do hope you found solution better that silly initing MC Table


AYNIADAM
Newbie
Posts: 7
Joined: 23.01.13
Reputation: 1 / (5)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby AYNIADAM » 11.02.18, 16:30

friends did not write here because in some cases the solution does not work. are largely solved by two separate methods.
Since this method is dangerous, it may be wrong to share it explicitly. I write with private message to the entrants.


DNC_Scotty
Newbie
Posts: 3
Joined: 07.08.16
Reputation: 0 / (0)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby DNC_Scotty » 11.02.18, 21:52

I would like to know....Thanks


Ohtic
Newbie
Posts: 4
Joined: 08.11.16
Reputation: 0 / (2)

Re: Rosewood ST1000LM035-Sysfile Write Eror

Postby Ohtic » 14.02.18, 01:36

I would also like to know. Thank you :)


Return to “Arch F3”

Who is online

Users browsing this forum: No registered users and 2 guests