List of compatible SATA PCB for 2,5" USB drives

Moderator: Maxim_TS


goooz
Newbie
Posts: 20
Joined: 30.04.12
Reputation: 1 / (12)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby goooz » 16.03.17, 16:33

771754 - 701692 or 771692

In my case it does not match. I have 771754 PCB with a 512kb Rom and 771692-005 works with 256kb Rom.

Who knows which Code is needed to get 512kb PCB (compatible with 771754) ??

User avatar
DataMedics
User
Posts: 450
Joined: 15.12.15
Reputation: 14 / (141)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby DataMedics » 16.03.17, 19:50

771692 is the correct number. You'll just have to find the right revision board which has that size ROM. Try a -005 REV A, I think that's the one I most commonly use.


jojo2012
Newbie
Posts: 38
Joined: 21.03.14
Reputation: 2 / (20)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby jojo2012 » 23.03.17, 15:58

DataMedics wrote:You can connect to a computer too, as long as you isolate the preamp so only the motor is spinning, then read ROM through terminal. Or just use boot ROM code. Always works for me.


Me too


Wanderson
Newbie
Posts: 13
Joined: 23.12.16
Reputation: 1 / (10)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby Wanderson » 11.04.17, 20:16

What model of the HD that comes with the 701672 board?
Can you help me please

User avatar
DataMedics
User
Posts: 450
Joined: 15.12.15
Reputation: 14 / (141)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby DataMedics » 12.04.17, 18:08

Wanderson wrote:Source of the post What model of the HD that comes with the 701672 board?
Can you help me please


Why ask what you can just search in 2 seconds on ebay?

http://www.ebay.com/sch/i.html?_odkw=70 ... b&_sacat=0


jenny
Newbie
Posts: 10
Joined: 12.01.17
Reputation: 1 / (10)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby jenny » 30.05.17, 12:39

i tested 771.962 - 771.959 not working
Help me
Regards
Data recovery Center in Vietnam
Invited to visit : http://www.cuudulieu116.com
My Facebook is : https://www.facebook.com/cuudulieuocung

User avatar
DataMedics
User
Posts: 450
Joined: 15.12.15
Reputation: 14 / (141)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby DataMedics » 30.05.17, 20:05

Just a few questions. First off, did you swap out the ROM code? Also, are you sure there isn't a bigger issue with the drive such as failed heads? Also, are you getting a message such as "SED locked" when you try to load the utility?

The boards are compatible. So it must be something else you're missing.


jenny
Newbie
Posts: 10
Joined: 12.01.17
Reputation: 1 / (10)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby jenny » 30.05.17, 22:35

DataMedics wrote:Source of the post Just a few questions. First off, did you swap out the ROM code? Also, are you sure there isn't a bigger issue with the drive such as failed heads? Also, are you getting a message such as "SED locked" when you try to load the utility?

The boards are compatible. So it must be something else you're missing.

Yes me have transfer u12
But it does not work
Can not open power motor not spin up
help me
Regards
Data recovery Center in Vietnam
Invited to visit : http://www.cuudulieu116.com
My Facebook is : https://www.facebook.com/cuudulieuocung

User avatar
SGdata
Newbie
Posts: 22
Joined: 24.11.16
Reputation: 2 / (20)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby SGdata » 30.05.17, 23:42

Did you transfer it correctly? The right side?


Maxim_TS
Site Admin
Posts: 223
Joined: 27.03.13
Reputation: 14 / (144)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby Maxim_TS » 31.05.17, 12:50

jenny, please show us the photo of U12 chip on board
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “WD USB”

Who is online

Users browsing this forum: No registered users and 2 guests