Toshiba DT01xxxx series

Moderators: Maxim_TS, Filipp_TS, Alex_TS, Sergey_TS


jerovsek
Newbie
Posts: 4
Joined: 11.01.13
Reputation: 0 / (3)

Toshiba DT01xxxx series

Postby jerovsek » 04.01.16, 15:53

Hello,

which which family to select for DT01xxxx

User avatar
Filipp_TS
Site Admin
Posts: 203
Joined: 15.04.13
Reputation: 9 / (85)

Re: Toshiba DT01xxxx series

Postby Filipp_TS » 11.01.16, 14:23

Hello,

try to use 7210DLE6 family.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Imnew
New user
Posts: 70
Joined: 19.12.12
Reputation: 2 / (20)

Re: Toshiba DT01xxxx series

Postby Imnew » 30.01.16, 10:44

Hello Filipp.
I have same case. The HDD is Toshiba DT01ACA050. I have chosen 7210DLE6 family from Hitachi. I can read all the modules. But it is not allowing to image or not allowing to read data area. Please help


drdoc
New user
Posts: 122
Joined: 07.12.11
Reputation: 2 / (20)

Re: Toshiba DT01xxxx series

Postby drdoc » 30.01.16, 12:39

Model : TOSHIBA DT01ACA100
Serial : Y3J1MH1MS
Firmware : MS2OA750
Capacity : 931.51 GB (1 953 525 168)

PC3K V6

it doesnt detect family, wont read modules UNLESS I try family 5C10CLA3 first



Selected family......................... : 7210DLE6
Model by ID............................. : TOSHIBA DT01ACA100

Techno mode key......................... : Ok

PCB only start!
PCB only start!
Error reading module USAG(0): PCB only start!
PCB only start!
PCB only start!
Error reading module USAG(1): PCB only start!
Loading modules table................................................. : Error
Error : .............................................................. : Module USAG: no copies read!
Loading the table of "open" modules................................... : Error
Error : .............................................................. : PCB only start!


========== Here I try 5C10CLA3 first, then 7210DLE6 works

Selected family......................... : 5C10CLA3
Model by ID............................. : TOSHIBA DT01ACA100

Techno mode key......................... : Error




Selected family......................... : 7210DLE6
Model by ID............................. : TOSHIBA DT01ACA100

Techno mode key......................... : Ok

Loading modules table................................................. : Ok
Loading the table of "open" modules................................... : Ok
skype: wayne_horner
Alandata Data Recovery

User avatar
DataMedics
User
Posts: 438
Joined: 15.12.15
Reputation: 14 / (138)

Re: Toshiba DT01xxxx series

Postby DataMedics » 30.01.16, 15:39

I guess that answers which Techno mode key it needs. You may have just helped Ace with this one. Good find!

User avatar
Filipp_TS
Site Admin
Posts: 203
Joined: 15.04.13
Reputation: 9 / (85)

Re: Toshiba DT01xxxx series

Postby Filipp_TS » 02.02.16, 16:56

Hello Everybody,

If you still have a problem with solutions for these hitachi drives please contact Technical support dept: ts.acelaboratory.com
and we are check these cases detailed.
Thanks
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


vijayan
Newbie
Posts: 21
Joined: 27.04.16
Reputation: 1 / (14)

Re: Toshiba DT01xxxx series

Postby vijayan » 12.02.18, 12:27

Yes Now

Same Case Solved Toshiba Hard Disk Toshiba Famliy Not Seleted Hitech Famliy Seleted Working Full Data Imaging Complied
Attachments
TOSHIBA DT01ACA100.JPG
TOSHIBA DT01ACA100.JPG (61.51 KiB) Viewed 838 times
Best regards,
vijayan MBA
RDR DATA RECOVERY
http://www.raminfotechdatarecovery.com
call 7092114411/22
sky:raminfotech.vijayan
whatup:9841983643 / 46

User avatar
Filipp_TS
Site Admin
Posts: 203
Joined: 15.04.13
Reputation: 9 / (85)

Re: Toshiba DT01xxxx series

Postby Filipp_TS » 20.02.18, 14:47

>Same Case Solved Toshiba Hard Disk Toshiba Famliy Not Seleted Hitech Famliy Seleted Working Full Data Imaging Complied

Because of DT**** toshiba drives are not Toshiba drives actually.
They are have Hitachi architecture, that's why for all DT*** drives need to use Hitachi ARM utility.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com

User avatar
Amarbir[CDR-Labs]
Advanced user
Posts: 642
Joined: 03.08.09
Reputation: 6 / (62)

Re: Toshiba DT01xxxx series

Postby Amarbir[CDR-Labs] » 25.02.18, 10:55

Well,
Its a hitachi drive period and you need to select " Tech Key " selection and unstick pcb only if thats selected ,Thats it you do not need to select any other family before this ,tech key detection is the key to this
Regards
Amarbir S Dhillon ,CDR Labs [ Chandigarh ,India ]
DataRecovery - The Affordable Way In India
Visit - > http://www.chandigarhdatarecovery.com My Facebook - > https://www.facebook.com/chandigarhdatarecovery


Return to “HGST/Toshiba (Arch ARM)”

Who is online

Users browsing this forum: No registered users and 1 guest