Page 1 of 1

The PC PATA-SATA Adapter for SSDs Based on PHISON PS3109 and PS3111 Controllers

Posted: 13.11.19, 19:15
by ACE_Admin
Image Image
When you work with SSDs based on PHISON PS3109 and PS3111 controllers in the Techno Mode, the technological commands can not be transmitted via the Marvell 88SA8052 bridge controllers installed in PC-3000 Express and PC-3000 UDMA-E. To solve these cases, there is a new PC PATA-SATA adapter based on the JMicron 20330 bridge.

To deal with SSD cases, you may also need the PC-3000 SSD software and the following adapters: SATA-M.2, SATA-mSATA. Please find the details on each adapter for SSD data recovery here. Contact your sales representative or send email to info@acelaboratory.com to know about the bundle offers.

Re: The PC PATA-SATA Adapter for SSDs Based on PHISON PS3109 and PS3111 Controllers

Posted: 14.11.19, 11:54
by northwind
What is the difference between this and the old PATA-SATA adapter used in the old PC-3000 UDMA kits??

Re: The PC PATA-SATA Adapter for SSDs Based on PHISON PS3109 and PS3111 Controllers

Posted: 14.11.19, 22:53
by Roman_TS
northwind wrote:Source of the post ference between this and the old PATA-SATA adapter used in the old PC-3000 UDMA kits??


Hello. There is no difference - it's the same adapter based on RED PCB. But for those customers who doesn't have old PC-3000 UDMA GREEN but want to recover PS3109 or PS3111 case, this adapter is a good option.

Re: The PC PATA-SATA Adapter for SSDs Based on PHISON PS3109 and PS3111 Controllers

Posted: 15.11.19, 12:19
by northwind
Hi Roman,
Thanks for clarifying this.
The adapter is definitely a must-have, no question about it.