Is there a solution for read BGA-132 chip's dump out?

Moderators: Roman_TS, Maxim_TS, Filipp_TS


youngyj
Newbie
Posts: 6
Joined: 15.03.16
Reputation: 1 / (5)

Is there a solution for read BGA-132 chip's dump out?

Postby youngyj » 28.03.16, 09:13

Is the circuit board support the bga 132?

User avatar
Roman_TS
Site Admin
Posts: 419
Joined: 09.02.11
Reputation: 18 / (183)

Re: Is there a solution for read BGA-132 chip's dump out?

Postby Roman_TS » 28.03.16, 11:48

You can easily use BGA-152 adapter for BGA-132 chip reading. What's the point to make it so complicated? :) Anyway - if you want - you can use Circuit Board for BGA-132 chip soldering on it :)
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


youngyj
Newbie
Posts: 6
Joined: 15.03.16
Reputation: 1 / (5)

Re: Is there a solution for read BGA-132 chip's dump out?

Postby youngyj » 29.03.16, 12:28

Thanks .
Is the BGA-152(132) adapter compatible with the version 3.0 of the flash reader?

User avatar
Roman_TS
Site Admin
Posts: 419
Joined: 09.02.11
Reputation: 18 / (183)

Re: Is there a solution for read BGA-132 chip's dump out?

Postby Roman_TS » 29.03.16, 18:45

Yes, it's fully compatible :)
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


pcrecovery
Newbie
Posts: 11
Joined: 27.01.12
Reputation: 1 / (10)

Re: Is there a solution for read BGA-132 chip's dump out?

Postby pcrecovery » 22.06.16, 20:50

I have read BGA132 with the BGA152 adapter. All you must do is CENTER the chip properly. The 132 pin chip is slightly smaller. Chip adapters have shims that you can replace/exchange for different size chips, but here, we have to simply center the chip in one direction. My chips have been the same length but smaller in width than 152.


sofiene
Newbie
Posts: 4
Joined: 23.11.16
Reputation: 0 / (4)

Re: Is there a solution for read BGA-132 chip's dump out?

Postby sofiene » 04.10.17, 18:13

BGA132 is is bigger for BGA152 adapter !!!!!!!! who can take a picture ? thank you. :roll:

User avatar
Roman_TS
Site Admin
Posts: 419
Joined: 09.02.11
Reputation: 18 / (183)

Re: Is there a solution for read BGA-132 chip's dump out?

Postby Roman_TS » 21.12.17, 10:32

sofiene wrote:Source of the post BGA132 is is bigger for BGA152 adapter !!!!!!!! who can take a picture ? thank you. :roll:


It's not bigger. Chip should be placed on the plastic frame around the socket, which is on 2 mm higher than the surface with contacts.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “PC-3000 Flash”

Who is online

Users browsing this forum: No registered users and 3 guests