Reread the sector already read

Data recovery from Hard Disk Drives with logical problems

Moderator: Dmitriy_TS


AdasRip
Newbie
Posts: 41
Joined: 28.04.14
Reputation: 2 / (17)

Reread the sector already read

Postby AdasRip » 19.07.18, 16:29

How to read the sector again?
I read several hundred sectors from Active PC-3000 Utility before I realized that the reading is wrong. I would like to read them again normally.

User avatar
DataMedics
Advanced user
Posts: 579
Joined: 15.12.15
Reputation: 16 / (163)

Re: Reread the sector already read

Postby DataMedics » 19.07.18, 18:07

Go to Service > Clear Map then select the orange color only and clear that.

You can also probably do this through the submap option, but that's a bit more complicated.


AdasRip
Newbie
Posts: 41
Joined: 28.04.14
Reputation: 2 / (17)

Re: Reread the sector already read

Postby AdasRip » 21.07.18, 11:16

Thank you DataMedics. It works.


unspoken
Newbie
Posts: 21
Joined: 06.06.16
Reputation: 1 / (14)

Re: Reread the sector already read

Postby unspoken » 02.02.19, 00:45

I've been a fool in practicing this method long time ago. I chose the wrong key ( not JMS538S) and I couldn't fix it again. I couldn't pick the right key. I had to re-read sectors. the cost of stupidity was a waste of time. :lol:


Dmitriy_TS
Site Admin
Posts: 298
Joined: 01.04.13
Reputation: 8 / (78)

Re: Reread the sector already read

Postby Dmitriy_TS » 21.03.19, 10:45

Also, you can create a submap of reading sectors. Disable Skip options in task settings and re-read this map again.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “Data Extractor”

Who is online

Users browsing this forum: No registered users and 1 guest