Scratched MQ01ABD100

Moderators: Filipp_TS, Garry_TS


shahi
New user
Posts: 56
Joined: 28.05.17
Reputation: 1 / (11)

Scratched MQ01ABD100

Postby shahi » 16.03.20, 15:01

Hello,

I got this drive dropped and in inspection found 1 platter is scratched. Also got debris generated from the surface.

Cleaned the surface, tried a donor, it got ready, was able to access few sectors and it died.

First Question - Which one is the H0 in this model? Lower one? or TOP? I believe it's H0

Second Question - In Toshiba - we read CP where Most modules are kept in ROM. Does it matter if surface (under H0) is bad?


CS DATA RECOVERY
Newbie
Posts: 36
Joined: 25.04.16
Reputation: 2 / (20)

Re: Scratched MQ01ABD100

Postby CS DATA RECOVERY » 17.03.20, 12:45

hi,

in my practical experience lower one is H0 (MQO1ABD100)...
Regards,
PAVAN KUMAR
CS DATA RECOVERY


shahi
New user
Posts: 56
Joined: 28.05.17
Reputation: 1 / (11)

Re: Scratched MQ01ABD100

Postby shahi » 17.03.20, 14:49

Ok.

If it would be WD/Seagate we could read from copy 1 in under H1.

But in this toshiba, if we cut h0, can it be read?


Return to “Toshiba native”

Who is online

Users browsing this forum: No registered users and 1 guest