MQ02ABF050H cannot read sector

Moderators: Filipp_TS, Garry_TS


thanhtn
Newbie
Posts: 5
Joined: 12.01.18
Reputation: 0 / (0)

MQ02ABF050H cannot read sector

Postby thanhtn » 03.11.20, 07:06

Hi all
I am having a Toshiba MQ02ABF050H hard drive
it boots up looks so ok
but sector cannot be read
I have done like instruction https://blog.acelaboratory.com/2045.html
and link https://blog.acelaboratory.com/pc-3000- ... rives.html
and link https://forum.acelaboratory.com/viewtop ... 147&t=7732
but all failed
help me please!
Image
Image
Image
Image
Image


northwind
New user
Posts: 95
Joined: 14.06.11
Reputation: 3 / (28)

Re: MQ02ABF050H cannot read sector

Postby northwind » 03.11.20, 11:00

Does terminal say
SIGNATURE SCAN FAILED
?


thanhtn
Newbie
Posts: 5
Joined: 12.01.18
Reputation: 0 / (0)

Re: MQ02ABF050H cannot read sector

Postby thanhtn » 04.11.20, 05:00

@nothwind Didn't see that message


northwind
New user
Posts: 95
Joined: 14.06.11
Reputation: 3 / (28)

Re: MQ02ABF050H cannot read sector

Postby northwind » 04.11.20, 11:26

Could you connect terminal and power up the drive? And post screenshot of terminal window here?


AJ2008
Posts: 1357
Joined: 25.11.08
Reputation: 11 / (105)

Re: MQ02ABF050H cannot read sector

Postby AJ2008 » 04.11.20, 19:15

Looks like a NAND issue to me, needs to be flushed over terminal


thanhtn
Newbie
Posts: 5
Joined: 12.01.18
Reputation: 0 / (0)

Re: MQ02ABF050H cannot read sector

Postby thanhtn » 05.11.20, 05:35

northwind wrote:Could you connect terminal and power up the drive? And post screenshot of terminal window here?

Image
there is a notice like in the picture, my friend


thanhtn
Newbie
Posts: 5
Joined: 12.01.18
Reputation: 0 / (0)

Re: MQ02ABF050H cannot read sector

Postby thanhtn » 05.11.20, 05:38

AJ2008 wrote:Source of the post Looks like a NAND issue to me, needs to be flushed over terminal

Can you guide me to fix it?


MasterT
New user
Posts: 54
Joined: 28.12.16
Reputation: 1 / (8)

Re: MQ02ABF050H cannot read sector

Postby MasterT » 05.11.20, 19:40

Toshiba SSHD (Hybrid drives)

Work with Service Area --> HDD Configuration Changing --> Flash Permanent Cache --> OFF
Or issue >NVA command in terminal and Restart Drive.


AJ2008
Posts: 1357
Joined: 25.11.08
Reputation: 11 / (105)

Re: MQ02ABF050H cannot read sector

Postby AJ2008 » 06.11.20, 13:26

thanhtn wrote:Source of the post
AJ2008 wrote:Source of the post Looks like a NAND issue to me, needs to be flushed over terminal

Can you guide me to fix it?


MasterT wrote:Source of the post Toshiba SSHD (Hybrid drives)

Work with Service Area --> HDD Configuration Changing --> Flash Permanent Cache --> OFF
Or issue >NVA command in terminal and Restart Drive.


thanhtn
Newbie
Posts: 5
Joined: 12.01.18
Reputation: 0 / (0)

Re: MQ02ABF050H cannot read sector

Postby thanhtn » 09.11.20, 17:43

MasterT wrote:Toshiba SSHD (Hybrid drives)

Work with Service Area --> HDD Configuration Changing --> Flash Permanent Cache --> OFF
Or issue >NVA command in terminal and Restart Drive.

Flash permanent cache parameter: it was faded and cannot be turned on or off
MQ02xxx I think it's not supported

User avatar
Filipp_TS
Site Admin
Posts: 250
Joined: 15.04.13
Reputation: 9 / (90)

Re: MQ02ABF050H cannot read sector

Postby Filipp_TS » 13.01.21, 15:31

It's supported.
And NAND can be disabled - that's a solution.
As was mentioned - connect terminal adapter, launch Toshiba utility and select ang MQ****H family name (important that 'H' in the end of family name).
then go to Work with Service Area --> HDD Configuration Changing --> Flash Permanent Cache --> OFF as was mentioned.
Then check sector access - should be available.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “Toshiba native”

Who is online

Users browsing this forum: No registered users and 1 guest