WD DRAGFLY1 family : ldr Required :Wd5000AADS - 00S9B0

A place where customers can exchange their HDD resources with each other

Moderators: Maxim_TS, Sergey_TS


micro999
Newbie
Posts: 6
Joined: 13.04.11
Reputation: 0 / (2)

WD DRAGFLY1 family : ldr Required :Wd5000AADS - 00S9B0

Postby micro999 » 25.06.14, 10:12

Hello,

WD DRAGFLY1 family : ldr Required

Postby micro999 » Wed Jun 25, 2014 6:49 am
Hello,

Wd - 500 gb : DRAGFLY1 family
Wd5000AADS - 00S9B0
DCM : HGRNHT2AGN

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 2
Cyl Count............................... : 192

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 192 Kb
ROM version............................. : 90.82R
ROM generation.......................... : 90.82R
Link table version...................... : 04.0F.
Consolidated ROM version................ : 00900082

ROM Modules:
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 75 271
SA regions address...................... : by default
SA Translator loading................... : Ok

Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Heads map............................... : 0,1
ROM Firmware version.................... : 00900082


Module search process started
Search method........................... : Search by ABA
ABA..................................... : 0
Size in sectors......................... : 184 300
ABA 0 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 1 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 2 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 3 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 4 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 5 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 6 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
Modules found........................... : 0
Module search process completed

How to access modules ? Can anyone Give me loader file ?

Please help

Regards,
micro

User avatar
houman_2h
Newbie
Posts: 42
Joined: 07.10.10
Reputation: 2 / (17)

Re: WD DRAGFLY1 family : ldr Required :Wd5000AADS - 00S9B0

Postby houman_2h » 18.07.14, 21:38

Hi micro999
I have 00900070
http://www.novinhdd.com/11-00900071.rpm


AJ2008
Posts: 1376
Joined: 25.11.08
Reputation: 11 / (111)

Re: WD DRAGFLY1 family : ldr Required :Wd5000AADS - 00S9B0

Postby AJ2008 » 21.07.14, 11:26

Try to block regions and check if you can get SA access then. but if you need loader then it needs to be exact version.

Alternatively, place donor PCB+ROM and use LDR relating to donor ROM, this will get you SA access and allow you to check for issues and save SA. Then you can reconnect patient PCB+ROM to check if problem is solved. If problem is not solved, use SA you saved to create hotswap donor.


Return to “HDD's resources exchange”

Who is online

Users browsing this forum: No registered users and 3 guests