ST5000LM00 - Slow reading

Moderator: Alex_TS


techchef1
Newbie
Posts: 15
Joined: 10.01.17
Reputation: 0 / (0)

ST5000LM00 - Slow reading

Postby techchef1 » 25.02.21, 11:13

Dear Frds ..

I have 5 TB hard disk ,ST5000LM000 - Reads reads sector very slow and softreset and hard reset applied on task but goes busy for about 10 mins and ready then it will reads some sector and will goes busy ,Any solution for this ?


AJ2008
Posts: 1385
Joined: 25.11.08
Reputation: 11 / (114)

Re: ST5000LM00 - Slow reading

Postby AJ2008 » 25.02.21, 12:21

Try to remove reallocation and background processes - also check MCMT


techchef1
Newbie
Posts: 15
Joined: 10.01.17
Reputation: 0 / (0)

Re: ST5000LM00 - Slow reading

Postby techchef1 » 08.03.21, 11:51

After fix 93 Sys file , i Got this error

LED:0x000000BD FAddr:0x00005E43
kindly tell me how to solve this case

User avatar
Filipp_TS
Site Admin
Posts: 253
Joined: 15.04.13
Reputation: 9 / (92)

Re: ST5000LM00 - Slow reading

Postby Filipp_TS » 09.06.21, 20:58

Hello.

Baseically LED:BD means damaged SMART system file(s).
Bad based on your provided story - could be damaged one or few (any) system files, necessary to check thaem by Ctrl-x report.
Also could be haeds issue (they can't write), you didn't check them and after modified 93 writing attempt it became damaged.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “Arch ST10”

Who is online

Users browsing this forum: No registered users and 2 guests