Page 1 of 1

ST3000DM001

Posted: 14.03.19, 13:08
by CIEL
Hi

I need some help with this drive ST3000DM001 FW:CC46 P/N:1ER166-570 DATE:09AUG2017. This drive have a problems of heads, but I have baout 3 months waiting for buy a donor on Ebay or Donnor Drive but theres is not have any otrehr drive like this, I just want to know if someone have a drive like this or know some compatibility whit other donor drive.

Thanks and best regards

Re: ST3000DM001

Posted: 14.03.19, 15:37
by lcoughey
If you are trying to search to the exact data, you are likely looking too hard.

ST3000DM001 and the 1st 3 digits of the SN should be enough.

Re: ST3000DM001

Posted: 14.03.19, 17:27
by CIEL
lcoughey wrote:Source of the post If you are trying to search to the exact data, you are likely looking too hard.

ST3000DM001 and the 1st 3 digits of the SN should be enough.


I usually look a hdd with 3 months (up or down) of difference in the date, but even so there is not find any HDD

Thanks

Re: ST3000DM001

Posted: 14.03.19, 17:27
by lcoughey
Got a picture of the top cover?

Re: ST3000DM001

Posted: 15.03.19, 11:22
by CIEL
lcoughey wrote:Source of the post Got a picture of the top cover?

Hi

This is the HDD

Thanks for your help
Attachments
20190315_102609.jpg
20190315_102609.jpg (2.43 MiB) Viewed 5464 times

Re: ST3000DM001

Posted: 15.03.19, 12:53
by lcoughey
Matching the model and first 3 digits of SN, I have 2 listed here:

https://hddstockroom.com/catalog/?search=Z50

Re: ST3000DM001

Posted: 19.03.19, 14:03
by CIEL
lcoughey wrote:Source of the post Matching the model and first 3 digits of SN, I have 2 listed here:

https://hddstockroom.com/catalog/?search=Z50


Hi lcoughey

the first number of the SN is fine but the FW and PN its not the same. I was try with a hdd just like a you send me but it is dont working, but thanks for yout help. I still looking

Thnaks and Best Regards

Re: ST3000DM001

Posted: 19.03.19, 14:11
by lcoughey
CIEL wrote:Source of the post
lcoughey wrote:Source of the post Matching the model and first 3 digits of SN, I have 2 listed here:

https://hddstockroom.com/catalog/?search=Z50


Hi lcoughey

the first number of the SN is fine but the FW and PN its not the same. I was try with a hdd just like a you send me but it is dont working, but thanks for yout help. I still looking

Thnaks and Best Regards

Then your issue is more than heads, in my opinion. Did you try the patient heads in the donor?

Re: ST3000DM001

Posted: 20.03.19, 18:22
by CIEL
lcoughey wrote:Source of the post Then your issue is more than heads, in my opinion. Did you try the patient heads in the donor?


When I receive the drive, this was has a problems that head-stack,

I was unstuck the heads with carefully and I was check the drive and the heads no work, I was try with a donor but this is not compatible,

I returned the heads to the donor and this are working fine.

You still thinking that I should be try change the heads of the patient in the donor?

Re: ST3000DM001

Posted: 20.03.19, 20:06
by lcoughey
If the patient heads work in the donor, you know both that they are compatible and that the issue must be with the firmware and/or surface.

Re: ST3000DM001

Posted: 21.03.19, 13:05
by CIEL
lcoughey wrote:Source of the post If the patient heads work in the donor, you know both that they are compatible and that the issue must be with the firmware and/or surface.


I test the patient heads in the donor and doesnt work , and the drive do it the same sound 2 klicks and motor spin off.

Re: ST3000DM001

Posted: 31.03.19, 13:02
by GuideRecovery
Can you upload the ROM of both patient and donor to see if they are compatible or not ?

Re: ST3000DM001

Posted: 08.04.19, 23:44
by DDDRI
Did you import adaptives from the donors rom into the patients?