ST1000LM035-1RK172 patched - no user access (abort)

Moderator: Dmitriy_TS


positivebit
Newbie
Posts: 3
Joined: 25.09.11
Reputation: 0 / (1)

ST1000LM035-1RK172 patched - no user access (abort)

Postby positivebit » 01.05.20, 17:24

patched rom in Rosewood utility, HDD ID fixed, backup resources 98% sucesfully.

power off/on, patch, ask secotors (any)
Terminal show:

Boot 0x80M
Tech Unlock Handshake: 0xCCD9DED1
Reply:

Rst 0x80MSrv DETCR init 0x0000
(P) SATA Reset

RAW OFF
PASS
DSC PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
ABORT!
OpCode = 00000024
SenseCode = 03310003
ReadyStatusFlags = 0002A1A1

ABORT!
OpCode = 00000024
SenseCode = 03310003
ReadyStatusFlags = 0002A1A1

Unrecoverable Read Verify Error Reported


k4z1
Newbie
Posts: 12
Joined: 13.06.18
Reputation: 0 / (0)

Re: ST1000LM035-1RK172 patched - no user access (abort)

Postby k4z1 » 05.05.20, 09:34

Does the drive give correct ID?
Which modules are corrupted?

User avatar
Filipp_TS
Site Admin
Posts: 238
Joined: 15.04.13
Reputation: 9 / (89)

Re: ST1000LM035-1RK172 patched - no user access (abort)

Postby Filipp_TS » 15.05.20, 11:38

Based on terminal report drive has Translator issue.
If case is an actual please contact Technical support - ts.acelaboratory.com
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “Arch F3”

Who is online

Users browsing this forum: No registered users and 3 guests