Postby dsolutions » 13.01.17, 00:12
I am having the same issue, except the terminal does not display a F3> prompt at all. The terminal only shows a "Boot 0x20M Spin Up", and then a LED0000EE Error. The diag readouts are:
HDD family detecting...
Tech Key...
Error starting command "En Tech" (ABR)
Family ID: 00
Selected family......................... : 3F, Pharaoh
Model by ID............................. : ST_M13FQBL
Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!
Family default settings loading!
Tech Key...
Error starting command "En Tech" (ABR)
Terminal : error detecting HDD terminal baud rate
Requesting FW Pkg ver ........ Z ÿ?7È
Detecting Phys Sct Size...
Result.................................. : Error
Error obtaining Phys Sect Size!
Error starting command "En Tech" (ABR)
Detecting Max Head number...
Phys. heads............................. : Error
Error starting command "En Tech" (ABR)
Error starting command "En Tech" (ABR)
Detecting Max Head number...
Phys. heads............................. : Error
Error starting command "En Tech" (ABR)
I have tried both methods for the LED error solution, and have tried the cntrl+z over a few dozen times. I have tried using a different rom with no effect. I have tried using a identical PCB with no effect. I am simply at a loss. Any help is greatly appreciated. Thanks!