ST500LT012-9WS142-188 - CfwDiscCode Not Loaded

Moderator: Dmitriy_TS


drdoc
New user
Posts: 124
Joined: 07.12.11
Reputation: 2 / (20)

ST500LT012-9WS142-188 - CfwDiscCode Not Loaded

Postby drdoc » 08.07.16, 19:48

I have a
st500lt012 I have bought 2 drives that appear to be good matches. As a test I pu the customers board on the donors to guage if it attempts to come ready.
If it locks onto the servo then chances are good that the heads have read compatibility.

customers drive does 3 big head sweeps and spins down with this message. There are no signs of crashing.

*** UPDATE ace says its rom corruption - anyone have s solution


Rst 0x10M
SPINUP FAILED
ExecuteSpinRequest
op=0100 resp=0003
op=0100 resp=0003
LED:000000BC FAddr:00007A43
LED:000000BC FAddr:00007A43
CfwDiscCode Not Loaded: 0002B4E0
LED:000000BC FAddr:00007A43

patient===========
Model : ST500LT012-9WS142-188
Serial : S0V0G7D0
Firmware : 0001SDM1
Capacity : 465.76 GB (976 773 168)
PN: 9WS142-188
SITE:WU <<<<<< DIFFERENT
DATE:13065
dom:08/2012 <<<
pcb:100696152 REV A <<<<
PreampType: D0 05

if I ^Z on powerup I can get terminal and
YARRABP LM93_1_1 SERVO256 RAP22 4k VBAR STD Mobil
Product FamilyId: 5F, MemberId: 0A
HDA SN: S0V0G7D0, RPM: 5408, Wedges: 100, Heads: 2, Lbas: 7470C06, PreampType: D0 05
PCBA SN: 0000K301CRBR, Controller: LUXORM93_1_1(FFFF)(FF-FF-FF-FF), Channel: MARVELL_9311, PowerAsic: MCKINLEY MOBILE PLUS Rev 15, BufferBytes: 1000000
Package Version: YA418A.SDM1.CA0663., Package P/N: ---------, Package Builder ID: 84,
Package Build Date: 05/28/2012, Package Build Time: 17:16:22, Package CFW Version: YA41.SDM1.00457396.8400,
Package SFW1 Version: A823, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 06630001, CustomerRel: 0001, Changelist: 00457396, ProdType: YA41.SDM1, Date: 05/28/2012, Time: 171622, UserId: 00080603
Servo FW Rev: A487
RAP FW Implementation Key: 16, Format Rev: 5D02, Contents Rev: 40 06 04 05
Features:
- Quadradic Equation AFH enabled
- VBAR with adjustable zone boundaries enabled
- Volume Based Sparing enabled
- IOEDC enabled
- IOECC enabled
- DERP Read Retries enabled
- LTTC-UDR2 enabled

============================
donor1

Model : ST500LT012-9WS142-188
Serial : W0VG6KHZ
Firmware : 0001SDM1
Capacity : 465.76 GB (976 773 168)
PN: 9WS142-188
DATE:14153
SITE:WU
dom:10/2013
pcb:100696152 REV C
PreampType: D0 57

F3 T>
YARRABP LM93_1_1 SERVO256 RAP22 4k VBAR STD Mobil
Product FamilyId: 5F, MemberId: 0A
HDA SN: W0VG6KHZ, RPM: 5408, Wedges: 100, Heads: 2, Lbas: 7470C06, PreampType: D0 57
PCBA SN: 0000K4129MPB, Controller: LUXORM93_1_1(FFFF)(FF-FF-FF-FF), Channel: MARVELL_9311, PowerAsic: MCKINLEY MOBILE PLUS Rev 8C, BufferBytes: 1000000
Package Version: YA418A.SDM1.CA0713.0001SDM1, Package P/N: ---------, Package Builder ID: 84,
Package Build Date: 07/02/2013, Package Build Time: 11:56:10, Package CFW Version: YA41.SDM1.00585251.8400,
Package SFW1 Version: A823, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 07130001, CustomerRel: 0001, Changelist: 00585251, ProdType: YA41.SDM1, Date: 07/02/2013, Time: 115610, UserId: 00080603
Servo FW Rev: A498
RAP FW Implementation Key: 16, Format Rev: 5D02, Contents Rev: 40 12 04 05
Features:
- Quadradic Equation AFH enabled
- VBAR with adjustable zone boundaries enabled
- Volume Based Sparing enabled
- IOEDC enabled
- IOECC enabled
- DERP Read Retries enabled
- LTTC-UDR2 disabled

DONOR2============
Model : ST500LT012-9WS142-188
Serial : S0V5NEFN
Firmware : 0001SDM1
Capacity : 465.76 GB (976 773 168)
PN: 9WS142-188
SITE:SU
DATE:13375
dom:03/2013 <<<
pcb:100696152 REV C <<<<
PreampType: B0 54

F3 T>
YARRABP LM93_1_1 SERVO256 RAP22 4k VBAR STD Mobil
Product FamilyId: 5F, MemberId: 0A
HDA SN: S0V5NEFN, RPM: 5408, Wedges: 100, Heads: 2, Lbas: 7470C06, PreampType: B0 54
PCBA SN: 0000M336AH6E, Controller: LUXORM93_1_1(FFFF)(FF-FF-FF-FF), Channel: MARVELL_9311, PowerAsic: MCKINLEY MOBILE PLUS Rev 8C, BufferBytes: 1000000
Package Version: YA418A.SDM1.CA0697.0001SDM1, Package P/N: ---------, Package Builder ID: 84,
Package Build Date: 11/09/2012, Package Build Time: 11:39:40, Package CFW Version: YA41.SDM1.00506459.8400,
Package SFW1 Version: A823, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 06970001, CustomerRel: 0001, Changelist: 00506459, ProdType: YA41.SDM1, Date: 11/09/2012, Time: 113940, UserId: 00080603
Servo FW Rev: A494
RAP FW Implementation Key: 16, Format Rev: 5D02, Contents Rev: 40 12 04 05
Features:
- Quadradic Equation AFH enabled
- VBAR with adjustable zone boundaries enabled
- Volume Based Sparing enabled
- IOEDC enabled
- IOECC enabled
- DERP Read Retries enabled
- LTTC-UDR2 enabled
skype: wayne_horner
Alandata Data Recovery

Return to “Arch F3”

Who is online

Users browsing this forum: No registered users and 12 guests