Which chip do I have to change for the donor pcb

Moderator: Maxim_TS


tonoarimany2012
Newbie
Posts: 8
Joined: 11.06.18
Reputation: 0 / (1)

Which chip do I have to change for the donor pcb

Postby tonoarimany2012 » 03.12.18, 03:36

Hi
what chip i have to use for the donor pcb

thanks
Attachments
donor board.jpg
donor board.jpg (12.59 KiB) Viewed 173 times


hdd00
Newbie
Posts: 6
Joined: 25.05.17
Reputation: 0 / (0)

Re: Which chip do I have to change for the donor pcb

Postby hdd00 » 03.12.18, 07:48

For a donor Sata Pcb , IC2 need to be changed .


GuideRecovery
New user
Posts: 61
Joined: 16.03.14
Reputation: 2 / (24)

Re: Which chip do I have to change for the donor pcb

Postby GuideRecovery » 06.12.18, 17:31

you need to change U12 only ... BTW if you have pc3000 why bother soldering.
there are other good ways to swap ROM
Regards
Wasim Zafar
Professional & Cost Effective Data Recovery Services in Pakistan
https://mindmergepk.com


Maxim_TS
Site Admin
Posts: 255
Joined: 27.03.13
Reputation: 15 / (146)

Re: Which chip do I have to change for the donor pcb

Postby Maxim_TS » 25.12.18, 15:45

U12 is a HDD ROM chip. U14 is USB bridge chip. It's better to read the ROM via COM-port, then write it to SATA PCB, this way is more safe than unsoldering.
http://blog.acelaboratory.com/boot-rom- ... rives.html
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “WD USB”

Who is online

Users browsing this forum: No registered users and 2 guests