wd10tmvw-11zsms1

Moderator: Maxim_TS


FDRC
Newbie
Posts: 6
Joined: 02.02.18
Reputation: 0 / (0)

wd10tmvw-11zsms1

Postby FDRC » 10.12.19, 13:27

when i have swap the rom from wd usb 2060-771737-000 to sata board 2060-771692-005 rev 5 not getting power
when i have put back the other rom its working
so what is the problem i have check other pcb of same number 771692


l.pascal
Newbie
Posts: 1
Joined: 27.02.19
Reputation: 0 / (0)

Re: wd10tmvw-11zsms1

Postby l.pascal » 11.12.19, 13:03

It may be that the 2 ROM on different sizes


FDRC
Newbie
Posts: 6
Joined: 02.02.18
Reputation: 0 / (0)

Re: wd10tmvw-11zsms1

Postby FDRC » 11.12.19, 17:03

can u send the pics for pcb were are 2 rom


FDRC
Newbie
Posts: 6
Joined: 02.02.18
Reputation: 0 / (0)

Re: wd10tmvw-11zsms1

Postby FDRC » 11.12.19, 17:03

so that i can swap 2 rom


lcoughey
User
Posts: 219
Joined: 12.01.12
Reputation: 8 / (81)

Re: wd10tmvw-11zsms1

Postby lcoughey » 11.12.19, 22:09

Maybe you should consider contacting a data recovery pro in your area.

User avatar
digitalsupport
New user
Posts: 143
Joined: 30.12.11
Reputation: 4 / (41)

Re: wd10tmvw-11zsms1

Postby digitalsupport » 12.12.19, 07:48

lcoughey wrote:Source of the post Maybe you should consider contacting a data recovery pro in your area.


+1


FDRC
Newbie
Posts: 6
Joined: 02.02.18
Reputation: 0 / (0)

Re: wd10tmvw-11zsms1

Postby FDRC » 12.12.19, 12:11

thanks guys i will try to usb soldering its good

User avatar
digitalsupport
New user
Posts: 143
Joined: 30.12.11
Reputation: 4 / (41)

Re: wd10tmvw-11zsms1

Postby digitalsupport » 12.12.19, 14:29

If you have ROM removed, make a backup using external programmer and write it back to SATA pcb via boot ROM.
I prefer to read and write ROM via boot instead of soldering.


FDRC
Newbie
Posts: 6
Joined: 02.02.18
Reputation: 0 / (0)

Re: wd10tmvw-11zsms1

Postby FDRC » 12.12.19, 21:03

yes i have try its showing rom space is low to write


Return to “WD USB”

Who is online

Users browsing this forum: No registered users and 1 guest