Page 1 of 1

wd20nmvw-11av3s2 Rom Transfer from usb pcb to Donor pcb

Posted: 30.12.18, 03:55
by Paulfromsurrey
I have Hard disk wd20nmvw-11av3s2 and I like to Transfer Rom from usb pcb to Donor pcb


I believe this drive has slow response issue so planing to change from usb pcb to sata

so i am looking for any documentation can help me to transfer the rom from this 2060-771961-001 rev A TO 2060-771960-000-REV A

This 2060-771961-001 has 12 pins so i like to know how we can setup com connection

how i can transfer rom information from one pcb to other pcb

Thanks

Re: wd20nmvw-11av3s2 Rom Transfer from usb pcb to Donor pcb

Posted: 30.12.18, 11:32
by digitalsupport
How to make a Com connection is right here https://forum.acelaboratory.com/viewtop ... 155&t=7397
How to transfer via Boot ROM mode you will find here: https://blog.acelaboratory.com/boot-rom ... rives.html

Re: wd20nmvw-11av3s2 Rom Transfer from usb pcb to Donor pcb

Posted: 31.12.18, 01:31
by Paulfromsurrey
Thank you Digital but the problem is in this model

there are two rows of 6 pins

not sure where the com connection should be connected which adapter is good to use

Re: wd20nmvw-11av3s2 Rom Transfer from usb pcb to Donor pcb

Posted: 31.12.18, 19:44
by Blizzard
You can use the WD 2.5 adapter. (see photo for connection)

Image

Re: wd20nmvw-11av3s2 Rom Transfer from usb pcb to Donor pcb

Posted: 09.01.19, 18:58
by Paulfromsurrey
Thank you Blizzard