WD10JPVX-60JC3T0 mod 11 damage

Moderator: Maxim_TS


Nova
New user
Posts: 87
Joined: 12.12.07
Reputation: 1 / (10)

WD10JPVX-60JC3T0 mod 11 damage

Postby Nova » 13.09.21, 03:05

This drive power on and trying to calibrate then shutdown, i have replaced the head it has the same issue. Trying to fix slow response issue, i get Module ID 11 reading error. Any idea guys?

Thank you


Maxim_TS
Site Admin
Posts: 345
Joined: 27.03.13
Reputation: 17 / (166)

Re: WD10JPVX-60JC3T0 mod 11 damage

Postby Maxim_TS » 13.09.21, 18:51

Nova, try to block SA access in ROM and restart the drive. If it spins down again, the new heads are not compatible or platters have issues. Also check if PCB is good, try to use a donor PCB.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Nova
New user
Posts: 87
Joined: 12.12.07
Reputation: 1 / (10)

Re: WD10JPVX-60JC3T0 mod 11 damage

Postby Nova » 14.09.21, 03:06

Hi Max

I have tried blocking SA, restarts the drive no spin down, drive into kernel mode, upload dir into HDD RAM but failed, Module id reading error


AJ2008
Posts: 1384
Joined: 25.11.08
Reputation: 11 / (113)

Re: WD10JPVX-60JC3T0 mod 11 damage

Postby AJ2008 » 15.09.21, 13:10

Try to upload compatible donor loader


Return to “WD Marvell”

Who is online

Users browsing this forum: No registered users and 1 guest