led 5b 0000

Moderator: Garry_TS


sepid
New user
Posts: 76
Joined: 29.10.13
Reputation: 2 / (22)

led 5b 0000

Postby sepid » 30.06.15, 17:33

hi
i ihave a h.d.d 160g 3.5
when power on only bsy !
i doing manual in family
output terminal :
SPW 1.5G LinkOk!5V: 04910
SpnOk
spd: 0000 0000 0000
H: +00000
ADC: FFFF
DAC: 7087
SK C: 0001A30F
ENG>SRV>
SvoTbl Loaded
CL 037D CM 04F1 SL E7EE SM E7AA
BD

FdtTbl Loaded


ofter a min
output terminal :
Sb
WriteSctLog -- buffer not valid
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000
LED 5B 0000

???????


AJ2008
Posts: 1330
Joined: 25.11.08
Reputation: 10 / (104)

Re: led 5b 0000

Postby AJ2008 » 30.06.15, 17:37

This is some SA error. Does spindle stop after some time? If yes, send some soft reset to it sometimes this will bring it online. You need to find some way to check SA modules, if you cannot get access with drive alone then you will need hotswap donor.


sepid
New user
Posts: 76
Joined: 29.10.13
Reputation: 2 / (22)

Re: led 5b 0000

Postby sepid » 01.07.15, 13:45

AJ2008 wrote:This is some SA error. Does spindle stop after some time? If yes, send some soft reset to it sometimes this will bring it online. You need to find some way to check SA modules, if you cannot get access with drive alone then you will need hotswap donor.

hi
no no spindle stop
spin works.
I've done a replacement board
But there is no difference

User avatar
Garry_TS
Site Admin
Posts: 36
Joined: 06.05.14
Reputation: 4 / (35)

Re: led 5b 0000

Postby Garry_TS » 25.11.15, 00:13

Please tell me the model of drive.

In general, you can try to write burn resources (FFlash or HT code) or make a hot swap using a donor with same commutator revision (first two long strings must be same)


Return to “Spin Point”

Who is online

Users browsing this forum: No registered users and 2 guests