Hitachi HTS545025B9SA02 - ERROR! LBA : 993 280 Verify sectors ext error HDD Redynes timeout (200)

Moderators: Maxim_TS, Filipp_TS, Alex_TS, Sergey_TS


d1d
Newbie
Posts: 16
Joined: 15.09.18
Reputation: 0 / (0)

Hitachi HTS545025B9SA02 - ERROR! LBA : 993 280 Verify sectors ext error HDD Redynes timeout (200)

Postby d1d » 18.09.18, 19:18

Hi everybody,

my Name is Luigi i´m from Germany and new in this forum.
I have the PC3000 since 2 Months and i have a case that i don´t know what i can do, maybe everyone have a idea...?
It is a Hitachi HTS545025B9SA02 - Apple - 5K500.B-250

I can read the Rom, the Ram, the Moduls and something else about the terminal.
But the Surface test brings a lot of errors like this:

Test.................................... : Surface verification
ERROR! LBA : 905 216 Verify sectors ext error HDD Redynes timeout (200)
Defect 905 216 - 907 263 (2048)

So what can i do? Please help me, i´am searching about four days about a reason...

Thanks a lot and best wishes

Luigi


d1d
Newbie
Posts: 16
Joined: 15.09.18
Reputation: 0 / (0)

Re: Hitachi HTS545025B9SA02 - ERROR! LBA : 993 280 Verify sectors ext error HDD Redynes timeout (200)

Postby d1d » 18.09.18, 22:29

Here i have found a problem in the moduls...

Selected family......................... : CUSTOM
Model by ID............................. : Hitachi HTS545025B9SA02

Techno mode key......................... : Ok
NV-RAM reading.......................... : Ok

Loading modules table................................................. : Ok
Loading the table of "open" modules................................... : Ok
Loading zone allocation table......................................... : Ok

Module RSVD Copy 0...................... : Ok
Module RSVD Copy 1...................... : Ok
Module RSVD Copy F...................... : Error
Module RESF Copy 0...................... : Ok
Module RESF Copy 1...................... : Ok
Module RESF Copy F...................... : Ok
Module RAM0 Copy 0...................... : Ok
Module RAM0 Copy 1...................... : Ok
Module RAM0 Copy F...................... : Ok
Module OVR0 Copy 0...................... : Ok
Module OVR0 Copy 1...................... : Ok
Module OVR0 Copy F...................... : Ok
Module RESF(1) Copy 0................... : Ok
Module RESF(1) Copy 1................... : Ok
Module RESF(1) Copy F................... : Ok
Module PTCH Copy 0...................... : Ok
Module PTCH Copy 1...................... : Ok
Module PTCH Copy F...................... : Ok
Module CNS1 Copy 0...................... : Ok
Module CNS1 Copy 1...................... : Ok
Module CNS1 Copy F...................... : Ok
Module RWCN Copy 0...................... : Ok
Module RWCN Copy 1...................... : Ok
Module RWCN Copy F...................... : Ok
Module ZONE Copy 1...................... : Ok
Module ZONE Copy F...................... : Ok
Module PTRT Copy 0...................... : Ok
Module PTRT Copy 1...................... : Ok
Module PTRT Copy F...................... : Ok
Module SMRT Copy 0...................... : Ok
Module SMRT Copy 1...................... : Ok
Module SMRT Copy F...................... : Ok
Module SRVP Copy 0...................... : Ok
Module SRVP Copy 1...................... : Ok
Module SRVP Copy F...................... : Ok
Module SRVM Copy 0...................... : Ok
Module SRVM Copy 1...................... : Ok
Module SRVM Copy F...................... : Ok
Module CHNL Copy 0...................... : Ok
Module CHNL Copy 1...................... : Ok
Module CHNL Copy F...................... : Ok
Module IDNT Copy 0...................... : Ok
Module IDNT Copy 1...................... : Ok
Module IDNT Copy F...................... : Ok
Module SN00 Copy 0...................... : Ok
Module SN00 Copy 1...................... : Ok
Module SN00 Copy F...................... : Ok
Module MISC Copy 0...................... : Ok
Module MISC Copy 1...................... : Ok
Module MISC Copy F...................... : Ok
Module ICES Copy 0...................... : Ok
Module ICES Copy 1...................... : Ok
Module ICES Copy F...................... : Ok
Module MLBA Copy 0...................... : Ok
Module MLBA Copy 1...................... : Ok
Module MLBA Copy F...................... : Ok
Module QMCN Copy 0...................... : Ok
Module QMCN Copy 1...................... : Ok
Module QMCN Copy F...................... : Ok
Module SMRT(1) Copy 0................... : Ok
Module SMRT(1) Copy 1................... : Ok
Module SMRT(1) Copy F................... : Ok
Module PNID Copy 0...................... : Ok
Module PNID Copy 1...................... : Ok
Module PNID Copy F...................... : Ok
Module SMRA Copy 0...................... : Ok
Module SMRA Copy 1...................... : Ok
Module SMRA Copy F...................... : Ok
Module ABLP Copy 0...................... : Ok
Module ABLP Copy 1...................... : Ok
Module ABLP Copy F...................... : Ok
Module ABLD Copy 0...................... : Ok
Module ABLD Copy 1...................... : Ok
Module ABLD Copy F...................... : Ok
Module SSTL Copy 0...................... : Ok
Module SSTL Copy 1...................... : Ok
Module SSTL Copy F...................... : Ok
Module SERL Copy 0...................... : Ok
Module SERL Copy 1...................... : Ok
Module SERL Copy F...................... : Ok
Module SSST Copy 0...................... : Ok
Module SSST Copy 1...................... : Ok
Module SSST Copy F...................... : Ok
Module SKPO Copy 0...................... : Ok
Module SKPO Copy 1...................... : Ok
Module SKPO Copy F...................... : Ok
Module DCOT Copy 0...................... : Ok
Module DCOT Copy 1...................... : Ok
Module DCOT Copy F...................... : Ok
Module SRIF Copy 0...................... : Ok
Module SRIF Copy 1...................... : Ok
Module SRIF Copy F...................... : Ok
Module BULK Copy 0...................... : Ok
Module BULK Copy 1...................... : Ok
Module BULK Copy F...................... : Ok
Module ALTT Copy 0...................... : Ok
Module ALTT Copy 1...................... : Ok
Module ALTT Copy F...................... : Ok
Module DBGC Copy 0...................... : Ok
Module DBGC Copy 1...................... : Ok
Module DBGC Copy F...................... : Ok
Module OFDT Copy 0...................... : Ok
Module OFDT Copy 1...................... : Ok
Module OFDT Copy F...................... : Ok
Module RDMT Copy 0...................... : Ok
Module RDMT Copy 1...................... : Ok
Module RDMT Copy F...................... : Ok
Module RELI Copy 0...................... : Ok
Module RELI Copy 1...................... : Ok
Module RELI Copy F...................... : Ok
Module PSHT Copy 0...................... : Ok
Module PSHT Copy 1...................... : Ok
Module PSHT Copy F...................... : Ok
Module OVR1 Copy 0...................... : Ok
Module OVR1 Copy 1...................... : Ok
Module SPRE Copy 0...................... : Ok
Module SPRE Copy 1...................... : Ok
Module PESD............................. : Ok
Module MFGP............................. : Ok
Module SRST............................. : Ok
Module FLOG............................. : Ok
Module DUMP............................. : Error
Module ELG1............................. : Ok
Module ELG2............................. : Ok
Module EVLG............................. : Ok
Module PIDM............................. : Ok
Module AMPM............................. : Ok
Module HLR1............................. : Ok
Module HLR2............................. : Ok
Module MFGT............................. : Ok
Module DDD0............................. : Ok
Module MRDM............................. : Ok
Module DIAG............................. : Ok
Module WRT0............................. : Error
Module WRT1............................. : Error
Module @@01............................. : Ok
Module @@02............................. : Ok
HDD has been opened successfully!

HDD Identification reading ............. : Ok

Maybe it can help....?

Thanks

Luigi


d1d
Newbie
Posts: 16
Joined: 15.09.18
Reputation: 0 / (0)

Re: Hitachi HTS545025B9SA02 - ERROR! LBA : 993 280 Verify sectors ext error HDD Redynes timeout (200)

Postby d1d » 18.09.18, 22:59

And this is coming in the DE:

CatalogFile BTree header is invalid
Its a HFS+ Partition

User avatar
Filipp_TS
Site Admin
Posts: 215
Joined: 15.04.13
Reputation: 9 / (87)

Re: Hitachi HTS545025B9SA02 - ERROR! LBA : 993 280 Verify sectors ext error HDD Redynes timeout (200)

Postby Filipp_TS » 25.09.18, 12:14

Hello,

Based on provided details there is no any Sa structure problems. All SA modules reads well.
But problem with partition structres.
Check that user area sectors are reading with out problems.
Also check that last LBA is available - it allows to understand that Translation is uploaded in RAM (or not).
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


d1d
Newbie
Posts: 16
Joined: 15.09.18
Reputation: 0 / (0)

Re: Hitachi HTS545025B9SA02 - ERROR! LBA : 993 280 Verify sectors ext error HDD Redynes timeout (200)

Postby d1d » 06.10.18, 12:12

Hello Filipp_TS,

thanks for your information.
So i`am wondering, because i have in the last days another case and just today in the morning i will do what you have told, but look this:

Module RSVD............................. : Ok
Module RESF............................. : Ok
Module RAM0............................. : Ok
Module OVR0............................. : Ok
Module RESF(1).......................... : Ok
Module PTCH............................. : Ok
Module CNS1............................. : Ok
Module RWCN............................. : Ok
Module ZONE............................. : Ok
Module PTRT............................. : Ok
Module SMRT............................. : Ok
Module SRVP............................. : Ok
Module SRVM............................. : Ok
Module CHNL............................. : Ok
Module IDNT............................. : Ok
Module SN00............................. : Ok
Module MISC............................. : Ok
Module ICES............................. : Ok
Module MLBA............................. : Ok
Module QMCN............................. : Ok
Module SMRT(1).......................... : Ok
Module PNID............................. : Ok
Module SMRA............................. : Ok
Module ABLP............................. : Ok
Module ABLD............................. : Ok
Module SSTL............................. : Ok
Module SERL............................. : Ok
Module SSST............................. : Ok
Module SKPO............................. : Ok
Module DCOT............................. : Ok
Module SRIF............................. : Ok
Module BULK............................. : Ok
Module ALTT............................. : Ok
Module DBGC............................. : Ok
Module OFDT............................. : Ok
Module RDMT............................. : Ok
Module RELI............................. : Ok
Module PSHT............................. : Ok
Module OVR1............................. : Ok
Module SPRE............................. : Ok
Module PESD............................. : Ok
Module MFGP............................. : Error
Error : Module not read (MFGP)
Error : Device error detected (UNC)
Module SRST............................. : Ok
Module FLOG............................. : Ok
Module DUMP............................. : Ok
Module CHNM............................. : Ok
Module RDM1............................. : Ok
Module RDM2............................. : Error
Error : Module not read (RDM2)
Error : Device error detected (UNC)
Module ELG1............................. : Error
Error : Module not read (ELG1)
Error : Device error detected (UNC)
Module ELG2............................. : Error
Error : Module not read (ELG2)
Error : Device error detected (UNC)
Module EVLG............................. : Ok
Module PID1............................. : Ok
Module PID2............................. : Error
Error : Module not read (PID2)
Error : Device error detected (UNC)
Module PIDM............................. : Ok
Module PDM1............................. : Ok
Module PDM2............................. : Error
Error : Module not read (PDM2)
Error : Device error detected (UNC)
Module AMPM............................. : Error
Error : Module not read (AMPM)
Error : Device error detected (UNC)
Module HLR1............................. : Error
Error : Module not read (HLR1)
Error : Device error detected (UNC)
Module HLR2............................. : Error
Error : Module not read (HLR2)
Error : Device error detected (UNC)
Module MFGT............................. : Ok
Module DDD0............................. : Error
Error : Module not read (DDD0)
Error : Device error detected (UNC)
Module MRDM............................. : Error
Error : Module not read (MRDM)
Error : Device error detected (UNC)
Module DIAG............................. : Error
Error : Module not read (DIAG)
Error : Device error detected (UNC)
Module WRT0............................. : Error
Error : Module not read (WRT0)
Error : Device error detected (UNC)
Module WRT1............................. : Error
Error : Module not read (WRT1)
Error : Device error detected (UNC)
Module @@01............................. : Error
Error : Module not read (@@01)
Error : Device error detected (UNC)
Module @@02............................. : Error
Error : Module not read (@@02)
Error : Device error detected (UNC)
Modules reading completed

The same HDD i have put them on the side and now i have SA Problems?
Is maybe the Head 1 broken? I have the Problems only on the copy 1 in the SA Struc...

Best wishes

Luigi


d1d
Newbie
Posts: 16
Joined: 15.09.18
Reputation: 0 / (0)

Re: Hitachi HTS545025B9SA02 - ERROR! LBA : 993 280 Verify sectors ext error HDD Redynes timeout (200)

Postby d1d » 08.10.18, 07:11

Now i can see the root from the HFS+ Partition but i can´t open it.
The DE says the Partition is empty or broken.

This is the Log when i will open the Partiton:

Error - Set UDMA = UDMA133
Init HFS+ partition at 409640
ExtentsFile map ... OK
Error - Set UDMA = UDMA133
BadBlockFile map ... Empty
AllocationFile map ... OK
CatalogFile map ... OK
CatalogFile BTree header is invalid
AttributesFile map ... OK
StartUpFile map ... Empty
SectorsPerBlock = 8
SectorsPerCatalogNode = 0
SectorsPerExtentsNode = 8
Task parameters saving: 06.10.2018 17:04:06
CatalogFile BTree header is invalid
======================================================
[08.10.2018 07:09:23] Partition analysis
======================================================
[08.10.2018 07:09:23] Catalog File scanning...
[08.10.2018 07:09:23] Scanning
Error - Set UDMA = UDMA133
Schwerwiegender Fehler
CatalogFile: LeafNodes = 0
ExtentsFile: LeafNodes = 0
[08.10.2018 07:09:50] Link extents
[08.10.2018 07:09:50] Update parent
[08.10.2018 07:09:50] Update root
[08.10.2018 07:09:50] Update hardlinks
[08.10.2018 07:09:50] Update Lost&Found
[08.10.2018 07:09:50] Update chains
[08.10.2018 07:09:50] Update duplicates
======================================================
start at: 08.10.2018 07:09:23
finish at: 08.10.2018 07:09:50
======================================================
Init HFS+ partition at 409640
ExtentsFile map ... OK
Error - Set UDMA = UDMA133
BadBlockFile map ... Empty
AllocationFile map ... OK
CatalogFile map ... OK
CatalogFile BTree header is invalid
AttributesFile map ... OK
StartUpFile map ... Empty
SectorsPerBlock = 8
SectorsPerCatalogNode = 0
SectorsPerExtentsNode = 8

Best wishes

Luigi


d1d
Newbie
Posts: 16
Joined: 15.09.18
Reputation: 0 / (0)

Re: Hitachi HTS545025B9SA02 - ERROR! LBA : 993 280 Verify sectors ext error HDD Redynes timeout (200)

Postby d1d » 23.10.18, 23:51

So, now i have a look into the hdd and the microjogs are broken.
i have changed the head but now i have a problem whit the hdd, look...

Loading data for correction of HDD family handling settings from section MEM_P
Loading data for correction of HDD family handling settings from section HTS5450B9


Selected family......................... : CUSTOM
Model by ID............................. : <ID IS NOT READ>

Techno mode key......................... : Ok
NV-RAM reading.......................... : Ok

Module not read (RESF)
Error : Device error detected (UNC)
Loading modules table................................................. : Error
Error : .............................................................. : Module not read (RESF)
Error : Device error detected (UNC)
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command
Module ZONE is not found!
Module is not loaded (RESF, Main module table)


Test : Reading NV-RAM
Reading NV-RAM to file ( C:\Program Files (x86)\ACE Lab\PC-3000\Bin\!Profiles\HITACHI-IBM\CUSTOM\HITACHI MAC\Data\NV-RAM\NV-RAM.nvr )
NV-RAM reading.......................... : Ok
Reading................................. : Ok
Saving.................................. : Ok

Test : SA structure test

Module is not loaded (RESF, Main module table)
NV-RAM reading.......................... : Ok

Module checking
Module RSVD Copy 0...................... : Error
Module RSVD Copy 1...................... : Error
Module RSVD Copy F...................... : Error

HDD Identification reading ............. : Device error detected "ABR"

So i think it is a problem whit the firmware, becaus the hdd is working whitout clicking or anything....
Have anyone an idea?

Thanks and best wishes

Luigi


Return to “HGST/Toshiba (Arch ARM)”

Who is online

Users browsing this forum: No registered users and 2 guests