HD Seagate 36GB SCSI, error command Translator Regeneration

Moderator: Sergey_TS


Alexandre Silveira
Newbie
Posts: 29
Joined: 25.06.08
Reputation: 1 / (6)

HD Seagate 36GB SCSI, error command Translator Regeneration

Postby Alexandre Silveira » 14.05.09, 15:00

Dears,

I run the command "Translator", but how show in the picture 2, the result show error.



Alexandre Silveira
Attachments
1.JPG
This HDD recognizes with the capacity 48MB.
1.JPG (16.44 KiB) Viewed 10104 times
2.JPG
Show error command "Translator"
2.JPG (27.22 KiB) Viewed 10123 times


misa
Newbie
Posts: 44
Joined: 29.11.07
Reputation: 2 / (20)

Re: HD Seagate 36GB SCSI, error command Translator Regeneration

Postby misa » 11.12.09, 17:34

I have "compatible" problem !

Show me : "Medium Format Corrupted"
and error translator regeneration
How to do ?

Misa

User avatar
Vikas
Newbie
Posts: 28
Joined: 24.07.07
Reputation: 1 / (14)

Re: HD Seagate 36GB SCSI, error command Translator Regeneration

Postby Vikas » 04.04.10, 21:57

What i do

1 Translator regenration
when it comes back
2 HPAto max ( Service area)
3 regenerate translators



Vikas


Nadpc3k
Newbie
Posts: 38
Joined: 01.04.12
Reputation: 2 / (18)

Re: HD Seagate 36GB SCSI, error command Translator Regenerat

Postby Nadpc3k » 09.10.13, 17:53

i have exact the same problem: i could not see where is " HPA to MAX " how to do that i really need help in this regards.


AJ2008
Posts: 1330
Joined: 25.11.08
Reputation: 10 / (104)

Re: HD Seagate 36GB SCSI, error command Translator Regenerat

Postby AJ2008 » 10.10.13, 11:21

For this specific problem you can repair with manual repair through Bustrace.

What are the full sense keys/codes you get?


Nadpc3k
Newbie
Posts: 38
Joined: 01.04.12
Reputation: 2 / (18)

Re: HD Seagate 36GB SCSI, error command Translator Regeneration

Postby Nadpc3k » 03.01.16, 22:54

I have one Seagate SCSI 146GB hard drive with medium errors.... i tried my best to regenerate translator but no luck at all ... i did try the method written by VIKAS ... but it did not help at all ... it was a easy fix before. ? i can read all the modules OK.. when power up gives me p list errors .. it is not reading plist... utility gives option to upload plist .. can i trick the drives by uploading plist of other drive and regenerate the translators ... any help appreciated

User avatar
Filipp_TS
Site Admin
Posts: 222
Joined: 15.04.13
Reputation: 9 / (88)

Re: HD Seagate 36GB SCSI, error command Translator Regeneration

Postby Filipp_TS » 18.02.16, 18:43

Nadpc3k wrote:Source of the post can i trick the drives by uploading plist of other drive and regenerate the translators ... any help appreciated


P-list module is unique list of defects and can't be taken from the donor drive/profile folder.
That's why the translator regeneration procedure doesn't fix the problem..
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “Seagate”

Who is online

Users browsing this forum: No registered users and 1 guest