HD SAS FUJITSU - MBA3147RC

Moderator: Sergey_TS


Alexandre Silveira
Newbie
Posts: 29
Joined: 25.06.08
Reputation: 1 / (6)

HD SAS FUJITSU - MBA3147RC

Postby Alexandre Silveira » 23.03.12, 14:47

Dear Friends
I have a Fujitsu HD SAS model MBA3147RC where I can not access the data area to retrieve the information.
He presents the following symptoms;

1. Starts the spindle motor = OK
2. After beginning not calibrated, it is emitting sounds metallic.
3. Analysis of PCB has no signs of chips or components visibly damaged.


I need help to try to recover the data, if someone has had some experience and solution to apply.


I thank all


Alexandre
Attachments
IMG 1.png
Photo of model HDD SAS
IMG 1.png (190.27 KiB) Viewed 7071 times

User avatar
ACE_Admin
Site Admin
Posts: 421
Joined: 09.08.07
Reputation: 6 / (60)

Re: HD SAS FUJITSU - MBA3147RC

Postby ACE_Admin » 26.03.12, 17:43

That was solved by making a hot swap and reading with "Long reading" option.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Alexandre Silveira
Newbie
Posts: 29
Joined: 25.06.08
Reputation: 1 / (6)

Re: HD SAS FUJITSU - MBA3147RC

Postby Alexandre Silveira » 31.03.12, 02:59

This case we have managed to solve here in our company. Hotswap procedures did not work, because the set of heads are damaged.
To retrieve the data we had to replace the head assembly using in our clean room.
Attachments
IMG 2.png
HDA Patient and Donor
IMG 2.png (143.21 KiB) Viewed 7053 times


Return to “Fujitsu”

Who is online

Users browsing this forum: No registered users and 2 guests