IBM IC35L036UWD210

Moderator: Sergey_TS


dmarques
User
Posts: 441
Joined: 14.06.07
Reputation: 2 / (20)

IBM IC35L036UWD210

Postby dmarques » 15.10.08, 19:22

Hi,

I have a IBM IC35L036UWD210 with a damaged PCB.
I swapped PCB by 2 others I have here with same P/N, and when I start the drive, spins, shows 0 mb of size and when I try to enter utility by reading SA drive power down.
Anyone had this problem already?

Thanks.

User avatar
ACE_Admin
Site Admin
Posts: 421
Joined: 09.08.07
Reputation: 6 / (60)

Re: IBM IC35L036UWD210

Postby ACE_Admin » 17.10.08, 11:09

These drives can have their PCB swapped with the donor's but if the donor has the same firmware version. Usually NV-Ram is an 8-leg pin. PC-3000 SCSI has more description about it.

The second thing you can try is to use Hot swap method for this drive. It is described on 4.9 , 4.10 Chapters in the manual for PC-3000 SCSI manual.

Very often this family has scratched surface problem
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “IBM”

Who is online

Users browsing this forum: No registered users and 1 guest