CRUCIAL MX500

Moderators: Roman_TS, Filipp_TS, Sergey_TS


techchef1
Newbie
Posts: 15
Joined: 10.01.17
Reputation: 0 / (0)

CRUCIAL MX500

Postby techchef1 » 14.01.21, 07:42

Hi ,
Drive comes ready ,When we read the id its gone busy ..Kindky guide me to recovery the data

thanks

User avatar
Roman_TS
Site Admin
Posts: 566
Joined: 09.02.11
Reputation: 21 / (213)

Re: CRUCIAL MX500

Postby Roman_TS » 14.01.21, 11:14

Hello.

BSY state means a serious firmware corruption inside the SSD. At this moment we can deal only with a few drives which are based on Marvell controller, where BSY state might be eliminated. They are:

Sandisk Ultra II (Marvell 88SS9187/88/89 and 88SS1074)
Sandisk SSD Plus (88SS1074)
WD Blue (88SS1074)
Plextor M9e (NVME 88SS1093)

Other Marvell-based drives have only limited support. We can rebuild translator and get access to data only if drive returns ID and stays in READY state.
Here is the list of supported drives:

https://blog.acelaboratory.com/pc-3000- ... dated.html
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Mehboob
Newbie
Posts: 12
Joined: 13.11.18
Reputation: 0 / (0)

Re: CRUCIAL MX500

Postby Mehboob » 01.02.21, 15:18

do pc3000 has support for SM2258H crucial mx500?
if yes help me out.

User avatar
Roman_TS
Site Admin
Posts: 566
Joined: 09.02.11
Reputation: 21 / (213)

Re: CRUCIAL MX500

Postby Roman_TS » 01.02.21, 19:29

Mehboob wrote:Source of the post do pc3000 has support for SM2258H crucial mx500?
if yes help me out.

We can work with SM2258XT modification of Crucial MX500, while SM2258H modification is different and not supported.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “M500 Series”

Who is online

Users browsing this forum: No registered users and 1 guest