CP33238B (PS3111) support

Moderators: Roman_TS, Filipp_TS, Sergey_TS


firdousnet
Newbie
Posts: 3
Joined: 10.07.16
Reputation: 0 / (0)

CP33238B (PS3111) support

Postby firdousnet » 05.02.20, 08:17

Hi

I have 2 CP33238B (PS3111) cases and one of them with FW:SBFK71W0 while other one SBFK71W1. With FW:SBFK71W1 i have already recovered 60 % of data using Kingston A400 utility connecting directly to sata 0 port. with FW:SBFK71W0 i have tried to connect same way but its creating translator then when accessing the data its going to busy and all sector reading 00 00.Then I follow this instruction ==> https://blog.acelaboratory.com/pc-3000- ... ility.html and connetc through PATA ( utility SmartBuy Revival 2 ) and short safe mode pin and try to upload matching loader but its giving error.The error is below. I have tried this for both drive and same result. I tried to upload different loader also but same error. Anybody have same issue ?


Loader uploading
****************************************
Code name............................... : Burner_PS3111_71.2.bin

Power Off
Power On
Safe mode............................... : Ok
Write seed.............................. : Ok
HDD Data timeout
Write HDD microcode .................... : Operation aborted
Operation aborted

SSD status:
SSD is in ready state................... : No
Firmware mode........................... : Unknown
SSD is locked........................... : Unknown
Techno mode is locked................... : Unknown
SSD is in Safe Mode..................... : Unknown
Logical access is possible.............. : No
Physical access is possible............. : No
Operation aborted
****************************************
Operation aborted

User avatar
Roman_TS
Site Admin
Posts: 493
Joined: 09.02.11
Reputation: 20 / (198)

Re: CP33238B (PS3111) support

Postby Roman_TS » 05.02.20, 09:11

Hello. Please make a ticket in ts.acelaboratory.com and we will help you.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


firdousnet
Newbie
Posts: 3
Joined: 10.07.16
Reputation: 0 / (0)

Re: CP33238B (PS3111) support

Postby firdousnet » 05.02.20, 09:46

Hi

My ticket was #90693


firdousnet
Newbie
Posts: 3
Joined: 10.07.16
Reputation: 0 / (0)

Re: CP33238B (PS3111) support

Postby firdousnet » 10.02.20, 08:52

Hi


I ordered new PATA SATA adapter and the new error is below. Any chance ?





Selected family......................... : Kingston A400
Controller.............................. : CP33238B (PS3111)

SSD status:
SSD is in ready state................... : Yes
Firmware mode........................... : ROM
SSD is locked........................... : No
SSD is in Safe Mode..................... : Yes
Logical access is possible.............. : No
Physical access is possible............. : No

Loader uploading
****************************************
Code name............................... : Burner_PS3111_71.2.bin

Write seed.............................. : Ok
Write PRAM.............................. : Ok
Checking................................ : Ok
Calling executable code................. : Ok
Write overlay into PRAM................. : Ok
Checking................................ : Ok
Write HDD microcode .................... : Ok

SSD status:
SSD is in ready state................... : Yes
Firmware mode........................... : LDR
SSD is locked........................... : No
SSD is in Safe Mode..................... : No
Logical access is possible.............. : No
Physical access is possible............. : Possibly
****************************************

Read System Info........................ : Ok
Read Chips Info......................... : Ok

USER password........................... : No

System Info:
Chips id................................ : 0x2CB47832AA04
Vendor.................................. : Micron
Type.................................... : 32L(B0KB) TLC 16k
Chip capacity........................... : 52 608 Mb
Channels................................ : 2
Chips (Total)........................... : 0x0C
LUNs per chip........................... : 1
Blocks per chip......................... : 0x0890
Pages per block......................... : 0x600
Sectors per page........................ : 0x20
Size of RAM chip........................ : 32 Mb
Firmware version........................ : SBFM71.2
Build time.............................. : 5 Feb 2018
Interleaved blocks...................... : Type 4
Techno mode lock supported.............. : Yes
Data is packed.......................... : No

Table of blocks pairs reading
Completed

Reassigned block table loading.......... : Ok

Translator initialization
****************************************
Creating translator
****************************************
Read System Info........................ : Ok
Read Chips Info......................... : Ok
Table of blocks pairs reading
Completed
Reassigned block table loading.......... : Ok

SSD
****************************************
Service area scanning
****************************************
block: 0x0000........................... : 3111 (ISP Id)
block: 0x0001........................... : 3111 (ISP Id)
block: 0x0003........................... : FFD0 (Srv)
block: 0x0004........................... : 3FB1 (Srv)
block: 0x0005........................... : FFA0 (CFG)
block: 0x0008........................... : FFB0 (PrIT)
block: 0x000F........................... : FFC2 (L2P Zone)
block: 0x0015........................... : FFC2 (L2P Zone)
block: 0x003B........................... : FFC2 (L2P Zone)
block: 0x0052........................... : FFC2 (L2P Zone)
block: 0x007B........................... : FFC1 (PrIT)
block: 0x00BA........................... : FFC1 (PrIT)
block: 0x00F9........................... : FFC2 (L2P Zone)
block: 0x0102........................... : FFC2 (L2P Zone)
block: 0x012A........................... : FFC2 (L2P Zone)
block: 0x015E........................... : FFC2 (L2P Zone)
block: 0x0161........................... : FFC2 (L2P Zone)
block: 0x0188........................... : FFC2 (L2P Zone)
block: 0x0190........................... : FFC0 (Smart Vt)
block: 0x01BA........................... : FFC2 (L2P Zone)
block: 0x01DC........................... : FFC2 (L2P Zone)
block: 0x01DF........................... : FFC1 (PrIT)
block: 0x01EA........................... : FFC2 (L2P Zone)
****************************************
Completed

Service blocks scanning
Completed

Apply filters
Chunks of translator (Found)............ : 0x34550

Filter 0...
Chunks of translator (Deleted).......... : 0x1C6E1

Filter 1...
Chunks of translator (Deleted).......... : 0x107DC

Filter 2...

Used blocks count = 0; TblIndex: 0x0000

Used blocks count = 0; TblIndex: 0x0001

Used blocks count = 0; TblIndex: 0x0002

Used blocks count = 0; TblIndex: 0x0006

Used blocks count = 0; TblIndex: 0x002E

Used blocks count = 0; TblIndex: 0x0038

Used blocks count = 0; TblIndex: 0x0039

Used blocks count = 0; TblIndex: 0x003A

Used blocks count = 0; TblIndex: 0x003B

Used blocks count = 0; TblIndex: 0x003C

Used blocks count = 0; TblIndex: 0x003E

Used blocks count = 0; TblIndex: 0x0042

Used blocks count = 0; TblIndex: 0x0045

Used blocks count = 0; TblIndex: 0x0049

Used blocks count = 0; TblIndex: 0x0056

Used blocks count = 0; TblIndex: 0x0057

Used blocks count = 0; TblIndex: 0x0065
Chunks of translator (Deleted).......... : 0x06D8

Filter 3...
Chunks of translator (Deleted).......... : 0x0000

Filter 4...
Chunks of translator (Deleted).......... : 0x0000
Completed

Analysis of obtained data
Estimated SSD capacity.................. : 937 721 856 (0x37E48000) LBA
Available to user....................... : 937 703 088 (0x37E436B0) LBA
User blocks count....................... : 0x06FC9000

Chunks of translator:
SSD..................................... : Used: 0x6FC9; Found: 0x6FBB; Min.: 0x0000; Max.: 0x6FC8

L2P:
Records count........................... : 0x1000
Completed

Translator build
Completed
****************************************
Completed
****************************************
Test completed
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 1; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 1; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 1; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 1; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 1; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 2; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 3; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 0; block: 0x0013; page: 0x40D7; Page marker checking error (Invalid data)
LBA 2 272; block: 0x0013; page: 0x1B80; Page marker checking error (Invalid data)
Soft reset ...
HDD Identification reading ............. : Ok

User avatar
Roman_TS
Site Admin
Posts: 493
Joined: 09.02.11
Reputation: 20 / (198)

Re: CP33238B (PS3111) support

Postby Roman_TS » 10.02.20, 11:25

Please make a ticker or reply in the old one. We do not provide technical support on forum.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “Other SSD Kingston”

Who is online

Users browsing this forum: No registered users and 1 guest