Page 1 of 1

Mz-Hpv5120 not power on death

Posted: 18.07.16, 09:22
by redlabs
Dear Friends ,

Can i get solution for this ssd drive not power ON ,How to check this ?
Attachments
P_20160717_164151.jpg
P_20160717_164151.jpg (1.45 MiB) Viewed 25210 times

Re: Mz-Hpv5120 not power on death

Posted: 18.07.16, 20:27
by DataMedics
A picture of the actual control chip would be a good start. Also what equipment do you have, PC-3000 flash, SSD edition?

Re: Mz-Hpv5120 not power on death

Posted: 19.07.16, 09:45
by redlabs
If i purchase SSD edition ,Recovery is possible for this ?

Re: Mz-Hpv5120 not power on death  Topic is solved

Posted: 19.07.16, 12:04
by Roman_TS
Hello! This is PM951 family SSD - in case if current SSD has a problem with Firmware, then - noway. It's rather new and not in support list.
Supported family list you can find here:
http://blog.acelaboratory.com/list

Re: Mz-Hpv5120 not power on death

Posted: 02.08.16, 12:41
by redlabs
Roman_TS wrote:Source of the post Hello! This is PM951 family SSD - in case if current SSD has a problem with Firmware, then - noway. It's rather new and not in support list.
Supported family list you can find here:
http://blog.acelaboratory.com/list



Please which adapter is best for SSD ? R u selling SSD adapter

Re: Mz-Hpv5120 not power on death

Posted: 04.08.16, 02:06
by Roman_TS
Yes, we are going to start selling the SSD adapters. Please contact with our sales department, thanks!
http://www.acelaboratory.com/order.php

Re: Mz-Hpv5120 not power on death

Posted: 09.08.16, 09:18
by redlabs
Thank you ...Roman

I didnt get any reply ...Please do the needful