840 Evo support

Moderators: Roman_TS, Filipp_TS, Sergey_TS


Bruno
New user
Posts: 150
Joined: 28.08.07
Reputation: 2 / (20)

Re: 840 Evo support

Postby Bruno » 15.05.17, 10:27

Hi Roman,
i have here a 840EVO, but after more then 30 tries with tweezers, the ssd will not come into safe mode.

User avatar
Roman_TS
Site Admin
Posts: 493
Joined: 09.02.11
Reputation: 20 / (198)

Re: 840 Evo support

Postby Roman_TS » 15.05.17, 13:02

Hello. Try to solder both pins together with wire. Then - try again, SAFE should works fine.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Bruno
New user
Posts: 150
Joined: 28.08.07
Reputation: 2 / (20)

Re: 840 Evo support

Postby Bruno » 15.05.17, 15:09

Thank you Roman for the tip. Unfortunately don't work..
I have booth Pins soldering by wire, and trying:

See Log.
Selected family......................... : Samsung 840 EVO series
Controller.............................. : S4LN045X01-8030

Techno mode key......................... : Techno mode error; unexpected error: Device error detected - Device error detected - Device error detected - Device error detected

SSD status:
SSD is in ready state................... : Yes
SSD is locked........................... : No
SSD is in Safe Mode..................... : No
Loader uploaded......................... : No
Logical access is possible.............. : No
Physical access is possible............. : No

Loader uploading
****************************************
Code name............................... : 840EVO.ldr

Power Off
Power On
Ready state waiting..................... : Ok
Safe mode............................... : Error

try again:
Power Off
Power On
Ready state waiting..................... : Ok
Safe mode............................... : Error
try again:
Power Off
Power On
Ready state waiting..................... : Ok
Safe mode............................... : Error
Operation aborted
****************************************
Loader is not uploaded! Some of the functions are not available!

USER password........................... : No


After Utility start, and i Switchen on Power, all LED are grey
After switch on with savepoints connected DRD and DSC are green.
May be, this SSD has forgotten his FW??

User avatar
Roman_TS
Site Admin
Posts: 493
Joined: 09.02.11
Reputation: 20 / (198)

Re: 840 Evo support

Postby Roman_TS » 16.05.17, 10:00

Well, do you remember that for uploading LDR you should connect terminal to SSD? Did you made it?

Actually, situation is very strange. I can see that drive is not in SAFE MODE.

What about passport ID? Does it show ROM MODE?
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Bruno
New user
Posts: 150
Joined: 28.08.07
Reputation: 2 / (20)

Re: 840 Evo support

Postby Bruno » 16.05.17, 15:53

Hi Roman,
shure i connect terminal to SSD.
But the problem is no switching SAVE mode.
The Utility showing nothing, no Model, no Serial, no Firmware, Capacity (0)...
see att. file.
Where i find Passport ID and ROM MODE?
Attachments
SSD.rtf
(2.09 MiB) Downloaded 200 times

User avatar
Roman_TS
Site Admin
Posts: 493
Joined: 09.02.11
Reputation: 20 / (198)

Re: 840 Evo support

Postby Roman_TS » 16.05.17, 18:24

Looks like final ROM corruption :) Not sure that we can do something with it.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Bruno
New user
Posts: 150
Joined: 28.08.07
Reputation: 2 / (20)

Re: 840 Evo support

Postby Bruno » 17.05.17, 09:38

Thank you Roman, :)

that is what i mean, with forgot the Firmware. :)
O.K. i Close the case, without recovering the data.
Have a nice day
Bruno


Return to “840 EVO Series”

Who is online

Users browsing this forum: No registered users and 1 guest