PC 3000 flash pinouts

Basic questions about PC-3000 Flash functionality

Moderators: Roman_TS, Dmitriy_TS, Filipp_TS


Rserrano
Newbie
Posts: 6
Joined: 17.08.19
Reputation: 0 / (0)

PC 3000 flash pinouts

Postby Rserrano » 10.07.20, 00:45

so im tryng to recover from a sd card and a micro sd under the pinout scheme on both of these items I come across a pin WP what is this .. WE VCC i can find but WP i cannot any ideas ? any help would be greatly appreciated ! So Many questions lololol

User avatar
d_d_recovery
New user
Posts: 71
Joined: 20.03.19
Reputation: 1 / (13)

Re: PC 3000 flash pinouts

Postby d_d_recovery » 10.07.20, 00:52

WP is Write Protect. You don't need it for a pinout recovery.


Rserrano
Newbie
Posts: 6
Joined: 17.08.19
Reputation: 0 / (0)

Re: PC 3000 flash pinouts

Postby Rserrano » 10.07.20, 21:11

WP wright protect no connection needed ggot it thanks now what about( BUT )http://www.pc3000flash.com/solbase/monochip.php?iid=21&lang=eng this is what im going by

User avatar
Roman_TS
Site Admin
Posts: 493
Joined: 09.02.11
Reputation: 20 / (198)

Re: PC 3000 flash pinouts

Postby Roman_TS » 10.07.20, 22:10

Hope that your card is not Samsung EVO :)
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Rserrano
Newbie
Posts: 6
Joined: 17.08.19
Reputation: 0 / (0)

Re: PC 3000 flash pinouts

Postby Rserrano » 14.07.20, 00:03

no its not mr roman! lol im working on 2 cards right now practice chips one is a micro sd card on hold right now but the one im working on is a sandisk ultra plus. 32 gb now i soldered it to the board looked under the micro scope and this is what i found.
S732G1621
TWLN002994792
the program reads Chip I.D. 983A98A3 it reads the chip but i cant figure out the controller name. any ideas ?? I did a great job I think, soldering it to the board being I see chip I.D. and it reads data from both chips (sandwiched) I read that from the manual lololol (roman)


Return to “For beginners (Flash)”

Who is online

Users browsing this forum: No registered users and 1 guest