Pinout Sandisk Extreme Pro SDXC II 128 GB

Questions about different pinouts, scheme of soldering and required equipment

Moderators: Dmitriy_TS, Roman_TS, Filipp_TS

User avatar
edbrandt
New user
Posts: 75
Joined: 04.05.17
Reputation: 2 / (17)

Pinout Sandisk Extreme Pro SDXC II 128 GB

Postby edbrandt » 11.08.21, 15:11

Hello there

Does anyone know pinout for a Sandisk Extreme Pro SDXC II 128 GB. Unfortunately it is not supported by PC-3000.
Also, if someone does; do you also know the internal structure - if it can be solved in PC3K after dump is read.

Attached is some pictures. I have not sanded the card yet (in case I can't proceed with the card), but the connectors can be seen through the coating.


Also.. I have a Sandisk Extreme Pro SDXC 128 GB from the same customer. Dump is read, but the controller is a Sandisk 82-00410A which currently is unsupported by PC3K due to partial data encryption. Anyone familiar with this controller?


I need to solve one of these card as the customer unfortunately formatted both cards (master and backup) in his Sony A7 Camera, and from what I understand the only way to recover files then is to perform a raw recovery from dump.

Thank you in advance

Best regards, Espen
Attachments
IMG_3051.jpg
IMG_3051.jpg (520.78 KiB) Viewed 234 times
IMG_3050.jpg
IMG_3050.jpg (860.82 KiB) Viewed 234 times
IMG_3049.jpg
IMG_3049.jpg (1.32 MiB) Viewed 234 times

User avatar
arvika
New user
Posts: 63
Joined: 14.10.09
Reputation: 2 / (21)

Re: Pinout Sandisk Extreme Pro SDXC II 128 GB

Postby arvika » 16.08.21, 22:28


User avatar
edbrandt
New user
Posts: 75
Joined: 04.05.17
Reputation: 2 / (17)

Re: Pinout Sandisk Extreme Pro SDXC II 128 GB

Postby edbrandt » 18.08.21, 00:31



Thanks. Do you know pinout, and if it can be solved with PC3K?

-Espen

User avatar
arvika
New user
Posts: 63
Joined: 14.10.09
Reputation: 2 / (21)

Re: Pinout Sandisk Extreme Pro SDXC II 128 GB

Postby arvika » 18.08.21, 21:09

Yes I have. I do not know if it possible solve by PC3K.

User avatar
Multi-COM
Newbie
Posts: 21
Joined: 19.04.17
Reputation: 1 / (10)

Re: Pinout Sandisk Extreme Pro SDXC II 128 GB

Postby Multi-COM » 18.08.21, 22:52

This pinout is supported by MR SP09 adapter - https://multi-recovery.com/subpages/MRSP09.php
--
Boguslaw Rzepka
http://multi-com.eu


Return to “Monolithic devices recovery”

Who is online

Users browsing this forum: No registered users and 2 guests