ST31000524AS Barracuda 7200.12

Moderator: Dmitriy_TS


SKII
Newbie
Posts: 1
Joined: 27.05.14
Reputation: 0 / (0)

ST31000524AS Barracuda 7200.12

Postby SKII » 12.11.14, 04:43

Hi,

I have the above harddisk. Firmware : JC45. P/N:9YP154-516.
The PCB is 100574451 Rev A.

The harddisk can be detected by PC3K when powered on. But when I tried to go to Data Extractor, the harddisk becomes BSY.

Do I need to short any points in the PCB?

Thanks.

Regards
Goh


AJ2008
Posts: 1334
Joined: 25.11.08
Reputation: 11 / (105)

Re: ST31000524AS Barracuda 7200.12

Postby AJ2008 » 12.11.14, 11:50

Probably it is SMART error. Can you reach Terminal T> in utility?


VaibhavS
Newbie
Posts: 16
Joined: 27.04.15
Reputation: 1 / (8)

Re: ST31000524AS Barracuda 7200.12

Postby VaibhavS » 09.06.15, 13:02

I have same problem. I cant reach t> terminal. Please give supported firmware files for upgrading.


AJ2008
Posts: 1334
Joined: 25.11.08
Reputation: 11 / (105)

Re: ST31000524AS Barracuda 7200.12

Postby AJ2008 » 09.06.15, 13:39

Enter utility without power to HDD, open terminal tab, power on, when ready press CTRL+Z for terminal prompt, if not possible then then hold CTRL+Z to reach T> shortly after power on. At terminal, send command to clear SMART.


Return to “Archive”

Who is online

Users browsing this forum: No registered users and 1 guest