St500DM002 DiagError 0000500E Process Defect List Error

Moderator: Dmitriy_TS


Arihant
New user
Posts: 115
Joined: 24.01.13
Reputation: 2 / (20)

St500DM002 DiagError 0000500E Process Defect List Error

Postby Arihant » 24.12.14, 13:44

Hi,
I have St500dm002 , Firmware KC45 Hard disk.
Give terminal message

"Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002A185"

F3 T>m0,6,2,,,,,22

DiagError 0000500E Process Defect List Error
R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, List Index 00256177, File Error 000000D0

F3 T>
Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002A185
ASCII Diag mode

F3 T>i4,1,22

Failed to load overlay 00000004
LED:000000CC FAddr:0028931

Looks like the Defect list has problem. How to resolve it?

Thanks,
Thanks,
Amit Shah
Arihant Data Recovery, India


shomyl
Newbie
Posts: 16
Joined: 11.01.14
Reputation: 1 / (5)

Re: St500DM002 DiagError 0000500E Process Defect List Error

Postby shomyl » 03.01.15, 17:04

This problem appear due to damaged P-list or improper defects in P-list. Drive not detect in this condition, some time detects ok.

This error appear when you are trying to regenerate translator.

Solution:
Read SYSTEM file 1B via terminal, remove all defects which has sign C, sign C = G to P transfer.
After that save it and write this system file again via terminal.
power reset
regenerate translator.

Done.

Regards


Arihant
New user
Posts: 115
Joined: 24.01.13
Reputation: 2 / (20)

Re: St500DM002 DiagError 0000500E Process Defect List Error

Postby Arihant » 06.01.15, 12:36

Unfortunately the customer has taken back the Hard disk. I can't test further.
Thanks,
Thanks,
Amit Shah
Arihant Data Recovery, India


Return to “Archive”

Who is online

Users browsing this forum: No registered users and 2 guests