ST2000DL003 Sector Reading Problem

Moderator: Dmitriy_TS


bikram
Newbie
Posts: 34
Joined: 02.07.09
Reputation: 1 / (12)

ST2000DL003 Sector Reading Problem

Postby bikram » 24.02.15, 13:36

Hi

I Have ST2000DL003 Hard Disk Which Is Only 1416578304 sector reading . i will try NG list Clearinabcg, translator recovery but problem is same


HDD family detecting...


Family ID: 4F
Selected family......................... : 4F, Bogart
Model by ID............................. : ST2000DL003-9VT166

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!


Family default settings loading!


Tech Key...

Requesting FW Pkg ver ........ BGC15D.CCD9.AAB600.CC98


Detecting Phys Sct Size...
Result.................................. : 4096

Detecting Max Head number...
Phys. heads............................. : 6

Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C000317 - 0x037FF7FF (0x0000000F)

LBA alignment........................... : 0

Obtaining Registry File information...
Reading Registry File...
Parsing Registry File...

Media Cache
===========
MC is not supported / NVC caching


Collecting Sys Files information...
ID Len
===============
0 12 Reserved Defect Table (SA defect table)
1 2 Drive Information File (DIF)
2 16 Performance Parameter File (PPF)
3 5582 Primary Defect File (P-List))
4 48 Servo Adaptive Parameter File (SAP)
5 4 Manufacturing Information File (MIF)
6 64 Read Adaptive Parameters File (RAP)
7 1 Controller Adaptive Parameters File (CAP)
8 4800
B 1000
C 65535 Serial Port Test Results File (Self Scan Log)
D 160
E 432 Data Integrity Check (DIC), HEAD 0
F 223 DIC Dummy File
13 8 Disc Registry File (settings, security, etc)
15 100 BGMS File (Directed Offline Scan)
16 2
17 40
19 24 Log File
1A 33 Log File
1B 1 Log File
1C 9
1D 128 Physical Overlay File 0
1E 128 Physical Overlay File 1
22 80 Drive Self Test (DST), Head 0
23 80 Drive Self Test (DST), Head 1
24 80 Drive Self Test (DST), Head 2
25 80 Drive Self Test (DST), Head 3
26 80 Drive Self Test (DST), Head 4
27 80 Drive Self Test (DST), Head 5
2A 9 Saved Mode Pages (HDD settings)
2B 2357 R/W Operating Parameters (translator, etc)
2C 432 Data Integrity Check (DIC), HEAD 1
2D 432 Data Integrity Check (DIC), HEAD 2
2E 432 Data Integrity Check (DIC), HEAD 3
2F 432 Data Integrity Check (DIC), HEAD 4
30 432 Data Integrity Check (DIC), HEAD 5
39 4096
3A 4
3D 1800
3E 1800
3F 4576
40 7
41 2180
42 4096
Collecting Sys File Infos completed

Collecting DT Infos...
ROM:
ID MemOffs Len
===========================
0 40043600 32768 Read Adaptive Parameters File (RAP)
1 40043400 512 Controller Adaptive Parameters File (CAP)
4 11000 6144 Servo Adaptive Parameter File (SAP)
40030000 13312
total 19456
5 6C000 81920 Servo Firmware Table
A 4010366C 1024 Seek Profile
13 40114D30 1440 Dependent Zone Table for User Area
14 401152D0 120 Dependent Zone Table for System Area
15 0 524288 Flash ROM
1B 4010E784 26028 Dependent Zone Group Tables for User Area
1C 4010E5F4 400 Dependent Zone Group Tables for System Area
1D 40043620 432 VBAR Configuration File
1E 400439C0 4016 Zone Format Parameters File

RAM:
ID MemOffs Len
===========================
0 40043600 32768 Read Adaptive Parameters File (RAP)
1 40043400 512 Controller Adaptive Parameters File (CAP)
2 400437D0 496 Zone Table
4 11000 6144 Servo Adaptive Parameter File (SAP)
40030000 13312
total 19456
5 6C000 81920 Servo Firmware Table
6 2FC0B8 81964 Servo Flaw Table
A 4010366C 1024 Seek Profile
13 40114D30 1440 Dependent Zone Table for User Area
14 401152D0 120 Dependent Zone Table for System Area
15 0 524288 Flash ROM
16 40043600 32 Drive Configuration Table
17 40045C90 2016 Temperature Control Configuration
1B 4010E784 26028 Dependent Zone Group Tables for User Area
1C 4010E5F4 400 Dependent Zone Group Tables for System Area
1D 40043620 432 VBAR Configuration File
1E 400439C0 4016 Zone Format Parameters File
1F 401ED700 1360 RW working user preamp table
20 401EDC50 80 RW working system preamp table

Collecting DT Infos completed


Reading autotuning buffer............... Ok
Searching module table in RAM... ....... Ok
Searching volume 3 file table in RAM.... Ok
Searching volume 0 file table in RAM.... Ok
Searching SMP RAM FID in RAM............ Ok
Searching Non Resident G-List FID in RAM Ok
Searching CFW OVL FID in RAM............ Ok
Searching DT table(RAM, WR) in RAM...... Ok
Searching DT table(RAM, RD) in RAM...... Ok

System Files I/O method detection... ATA(direct)



Test : Edit HDD ID
Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C000317 - 0x037FF7FF (0x0000000F)
Obtaining Registry File information...
Reading Registry File...
Parsing Registry File...
Writing Saved Mode Pages...
HDD power supply switching OFF/ON...


Test : Recover translator
First start
Translation "forks" list file........... : C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\Bogart\ST2000DL003-9VT166-CC98-5YD3NBJC\Defects\TranslationForks.lba
Maximal defect chain length............. : 64
Take into account P-List................ : Yes
At ambiguity hide "left" UNC............ : Yes
Process "32 byte tail" bug.............. : Yes
Execute Reset after defect hiding....... : Yes


HDD resources backup
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\Bogart\ST2000DL003-9VT166-CC98-5YD3NBJC\Data\SABackup\


Backup of service information completed

Switching Autoreassign OFF...
Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
Writing Saved Mode Pages...
HDD power supply switching OFF/ON...

G-List erase...

Translator regeneration...
Result.................................. : Ok

HDD ID reading...
Detecting defects hiding cmd type...
G-List erase...

Start scanning...
"Fork" searching: 0 - 3907029167
Verify sectors ext error Device error detected "UNC"
"Left fork", LBA = 01416578495, pattern 0xFF
Defects hiding (P23)...
Moving defects to Slip-List...
Translator regeneration...
"Fork" searching: 1416578495 - 3907029167
Verify sectors ext error Device error detected "UNC"
"Right fork", LBA = 01416578495, pattern 0x00
Defects hiding (P23)...
Moving defects to Slip-List...
Translator regeneration...
"Fork" searching: 1416578495 - 3907029167
Verify sectors ext error Device error detected "UNC"
Translation "fork" direction detection ambiguity!
Correct it manually!
LBA : 1416578495
Thanks & Regard
Bikram Singh

Return to “Archive”

Who is online

Users browsing this forum: No registered users and 1 guest