ST1000333AS busy problem with led:00000cd err

Moderator: Dmitriy_TS


jasminehell
Newbie
Posts: 7
Joined: 20.07.15
Reputation: 0 / (2)

ST1000333AS busy problem with led:00000cd err

Postby jasminehell » 20.07.15, 13:46

hi

ive got a ST1000333AS and it is just busy
both tried short connect and isolating PCB
and sill cannot appear F3 T>/

here is the code
Rst 0x20M
LED:000000CD FAddr:00010303
LED:000000CD FAddr:00010303


AJ2008
Posts: 1334
Joined: 25.11.08
Reputation: 11 / (105)

Re: ST1000333AS busy problem with led:00000cd err

Postby AJ2008 » 20.07.15, 13:54

T> should be ok on this without need to short circuit. What is FW version?


jasminehell
Newbie
Posts: 7
Joined: 20.07.15
Reputation: 0 / (2)

Re: ST1000333AS busy problem with led:00000cd err

Postby jasminehell » 21.07.15, 08:55

AJ2008 wrote:T> should be ok on this without need to short circuit. What is FW version?


it is cc1f,and im lookin for a same hdd.
does hot swap work?


AJ2008
Posts: 1334
Joined: 25.11.08
Reputation: 11 / (105)

Re: ST1000333AS busy problem with led:00000cd err

Postby AJ2008 » 21.07.15, 12:03

HotSwap wont work.

IF you place paper to isolate heads from PCB and wait some time, it should reach ready with T> access. What happens if you isolate and wait for it?


jasminehell
Newbie
Posts: 7
Joined: 20.07.15
Reputation: 0 / (2)

Re: ST1000333AS busy problem with led:00000cd err

Postby jasminehell » 22.07.15, 08:27

when i isolating PCB,no code.and it seems it's ready.
but when ctrl+z ,nothing happens.


Return to “Archive”

Who is online

Users browsing this forum: No registered users and 2 guests