Work with SAS HDD in PC-3000 for SCSI

Moderator: Sergey_TS


avenger-fr
Newbie
Posts: 17
Joined: 26.09.07
Reputation: 1 / (5)

Work with SAS HDD in PC-3000 for SCSI

Postby avenger-fr » 26.03.10, 12:11

PC-3000 SCSI and SAS : list of tested controllers (with universal utility)

Tested OK
- Adaptec ASC-1405 PCI-Express (From AceLab site)
- Adaptec ASC-1045 PCI-Express (From AceLab site)
- P6T WS pro Motherboard internal card chipset Marvell 64xx/63xx SAS controller


Tested NOT COMPATIBLE
- Card HP 8INT Port SAS (PCI-X) with a chipset LSI LOGIC 6208A2 LSISAS1068


avenger-fr
Newbie
Posts: 17
Joined: 26.09.07
Reputation: 1 / (5)

Re: Work with SAS HDD in PC-3000 for SCSI

Postby avenger-fr » 26.03.10, 12:14

Why can we use data extractor with this type of drive (SAS) ?
why only make clone ??? Is it so different from SCSI ???


ZeBong
User
Posts: 232
Joined: 24.05.08
Reputation: 2 / (20)

Re: Work with SAS HDD in PC-3000 for SCSI

Postby ZeBong » 30.03.10, 01:42

Hi,

Is possoble in the PC3K SCSI Tools acess the SAS Service Area ?

Or just clone it as a normal disk with DE ?


Regards


-BR-
New user
Posts: 79
Joined: 18.12.08
Reputation: 2 / (20)

Re: Work with SAS HDD in PC-3000 for SCSI

Postby -BR- » 08.09.10, 10:00

Late answer, but yes!

The kit PC3K SCSI + adaptec 1405 card is able to access SAS fw

It can read modules, tracks, rom, perform head tests, head maping, translator regen, all the good stuff :P

-BR-


ZeBong
User
Posts: 232
Joined: 24.05.08
Reputation: 2 / (20)

Re: Work with SAS HDD in PC-3000 for SCSI

Postby ZeBong » 08.09.10, 13:19

Thanks -BR-, for the reply.

I think this should be respond by the support of the pc3kscsi.

I was interesting in buy one.

Regards
Jose


mandr
Newbie
Posts: 29
Joined: 16.07.08
Reputation: 0 / (0)

Re: Work with SAS HDD in PC-3000 for SCSI

Postby mandr » 08.09.10, 17:06

-BR- wrote:
It can read modules, tracks, rom, perform head tests, head maping, translator regen, all the good stuff :P



Except regenerate translator on SAS cheetah :(

User avatar
ACE_Admin
Site Admin
Posts: 442
Joined: 09.08.07
Reputation: 7 / (74)

Re: Work with SAS HDD in PC-3000 for SCSI

Postby ACE_Admin » 09.09.10, 11:43

I think this should be respond by the support of the pc3kscsi.


I confirm , that only Adaptec SAS-adapters mentioned above (Adaptec ASC-1405 and Adaptec ASC-1045 for PCI Express bus) are compartible with PC-3000 SCSI equipment. Unfortunately, other SAS controllers were not tested.

Except regenerate translator on SAS cheetah


Please specify the model you were not able to recalculate translator.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


-BR-
New user
Posts: 79
Joined: 18.12.08
Reputation: 2 / (20)

Re: Work with SAS HDD in PC-3000 for SCSI

Postby -BR- » 10.09.10, 02:22

Well, I was not able to test all Seagate SAS families yet, but all the ones which I came across, the utility was able to regenerate it's translator succesfully :P

Some recent examples of SAS succesfully regenerated translators:

Model: ST373455SS - Cheetah 15.5K family
Result: translator regeneration was performed succesfully

Model: ST3400755SS - Cheetah NS family
Result: translator regeneration was performed succesfully

Follows attached a screenshot from Cheetah 15.5K command result

-BR-
Attachments
SAS Cheetah 15.5 translator regeneration.jpg
Screenshot from SAS Cheetah 15.5K translator regeneration command resulting in success
SAS Cheetah 15.5 translator regeneration.jpg (62.55 KiB) Viewed 8705 times

User avatar
ACE_Admin
Site Admin
Posts: 442
Joined: 09.08.07
Reputation: 7 / (74)

Re: Work with SAS HDD in PC-3000 for SCSI

Postby ACE_Admin » 22.04.11, 15:39

If there were a problem with regenerating translator, please provide hard drive firmware version. I suppose the problem is related to different versions.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “Archive”

Who is online

Users browsing this forum: No registered users and 6 guests