WD5000BPVT-00HXZT1 - TechnoKey error - FW 01.01A01

Moderator: Maxim_TS


d1d
Newbie
Posts: 26
Joined: 15.09.18
Reputation: 0 / (0)

WD5000BPVT-00HXZT1 - TechnoKey error - FW 01.01A01

Postby d1d » 16.03.19, 17:29

Hey @ all,

i have a WD5000BPVT here and i can start the HDD, i can read the Rom but i can´t load the LDR or anything becaus i get a TechnoKey error...
When the Utility is starting it takes a extrem long time i can here the hdd head but it dosen´t open the Utility in PC3000 only BootCom Mode is working....
LDR Upload isen´t working to becaus it takes also a extrem long time and after waiting i get a error about the TechnoKey...

Anyone an idea?

Thanks a lot and best wishes

Luigi

User avatar
Sergey_TS
Site Admin
Posts: 53
Joined: 17.07.15
Reputation: 2 / (22)

Re: WD5000BPVT-00HXZT1 - TechnoKey error - FW 01.01A01

Postby Sergey_TS » 18.03.19, 15:51

Hello Luigi!
Have you tried to isolate PCB and block SA access before trying to upload LDR?
If BootCom Mode is working you can rewrite ROM with 'Block SA' option and proceed diagnostic.
If drive can't start even in Kernel mode it makes sense to check with donor PCB (ROM should be transferred from patient).
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com

User avatar
Amarbir[CDR-Labs]
Advanced user
Posts: 696
Joined: 03.08.09
Reputation: 7 / (68)

Re: WD5000BPVT-00HXZT1 - TechnoKey error - FW 01.01A01

Postby Amarbir[CDR-Labs] » 18.03.19, 17:02

Hi Luigi ,
The Procedure Is

1 : We Block SA Access " Means If We Start HDD It Only Reads Firmware Till PCB Level And Not From Platter "
2 : Then We Upload To RAM " Overlay Modules Mod 11 Etc And Dir Module Which Has All Other Module Address "
3 : After This The HDD Gives Us Full Access To Platter Firmware
4 : We Solve All Firmware Level Issues And Unblock SA Access And Voila :mrgreen:
Regards
Amarbir S Dhillon ,CDR Labs [ Chandigarh ,India ]
DataRecovery - The Affordable Way In India
Visit - > http://www.chandigarhdatarecovery.com My Facebook - > https://www.facebook.com/chandigarhdatarecovery


Maxim_TS
Site Admin
Posts: 269
Joined: 27.03.13
Reputation: 15 / (149)

Re: WD5000BPVT-00HXZT1 - TechnoKey error - FW 01.01A01

Postby Maxim_TS » 19.03.19, 09:43

With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “WD Marvell”

Who is online

Users browsing this forum: No registered users and 0 guests