Sandisk Plus SM2256S Topic is solved

Moderators: Roman_TS, Filipp_TS, Sergey_TS


MicheleVitiello
Newbie
Posts: 6
Joined: 20.10.16
Reputation: 0 / (3)

Sandisk Plus SM2256S

Postby MicheleVitiello » 12.05.20, 10:17

Hello, we have this Sandisk SSD that we need to recover data from, I saw that this particular controller is not supported.
During power up it never reach ready state but remains BSY, I can put it in safe mode but it fails to upload the loader.
I tried with ADATA and AMD Radeon R3 utilities.
I attach pics of the drive.

Is there a way to recover data?
Do you think a chip-off and reading using PC-3000 flash will help?

Code: Select all

Model : SM2256AB-80-10000000
Serial : (03)5526888-20080228
Firmware : 20141211
Capacity : 1 GB (2 096 640)



Code: Select all

BASIC INFORMATION
Vendor.................................. : Sandisk
Type.................................... : 15nm TLC 16k
Chip capacity........................... : 1 024 Mb
Channels................................ : 1
Chips per channel....................... : 1
Planes per chip......................... : 1
LUNs per chip........................... : 1
Blocks per chip......................... : 0x0100
Pages per block......................... : 0x0100
Page size............................... : 0x4000
Max retry level......................... : 0x00

MEMORY MICROCHIP INFORMATION
-------------------------------------------------------------------------
:           :       Chip 0 :       Chip 1 :       Chip 2 :       Chip 3 :
-------------------------------------------------------------------------
: Channel 0 : 453E9AA37ED1 :              : 453E9AA37ED1 :              :
-------------------------------------------------------------------------
: Channel 1 : 453E9AA37ED1 :              : 453E9AA37ED1 :              :
-------------------------------------------------------------------------
: Channel 2 : 453E9AA37ED1 :              : 453E9AA37ED1 :              :
-------------------------------------------------------------------------
: Channel 3 : 453E9AA37ED1 :              : 453E9AA37ED1 :              :
-------------------------------------------------------------------------
Attention! The specified number of chips (1) does not correspond to the number of detected chips (8)!
Attachments
front.jpg
front.jpg (1006 KiB) Viewed 62 times
back.jpg
back.jpg (928.27 KiB) Viewed 62 times

User avatar
Roman_TS
Site Admin
Posts: 479
Joined: 09.02.11
Reputation: 20 / (197)

Re: Sandisk Plus SM2256S  Topic is solved

Postby Roman_TS » 12.05.20, 10:31

Hello!

Chip-off is useless for all modern SSD. There is no chance to recover at least a partial data without a good translator algorithm for block reconstruction.
For now this model is not supported. We can work with Sandisk Plus which is based on SM2246XT and Marvell 88SS1074. Other modifications are not supported right now.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “Other SSD”

Who is online

Users browsing this forum: No registered users and 0 guests