List of compatible SATA PCB for 2,5" USB drives

Moderator: Maxim_TS


goooz
Newbie
Posts: 22
Joined: 30.04.12
Reputation: 1 / (12)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby goooz » 16.03.17, 16:33

771754 - 701692 or 771692

In my case it does not match. I have 771754 PCB with a 512kb Rom and 771692-005 works with 256kb Rom.

Who knows which Code is needed to get 512kb PCB (compatible with 771754) ??

User avatar
DataMedics
Advanced user
Posts: 545
Joined: 15.12.15
Reputation: 16 / (157)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby DataMedics » 16.03.17, 19:50

771692 is the correct number. You'll just have to find the right revision board which has that size ROM. Try a -005 REV A, I think that's the one I most commonly use.


jojo2012
New user
Posts: 59
Joined: 21.03.14
Reputation: 2 / (23)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby jojo2012 » 23.03.17, 15:58

DataMedics wrote:You can connect to a computer too, as long as you isolate the preamp so only the motor is spinning, then read ROM through terminal. Or just use boot ROM code. Always works for me.


Me too


Wanderson
Newbie
Posts: 13
Joined: 23.12.16
Reputation: 1 / (10)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby Wanderson » 11.04.17, 20:16

What model of the HD that comes with the 701672 board?
Can you help me please

User avatar
DataMedics
Advanced user
Posts: 545
Joined: 15.12.15
Reputation: 16 / (157)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby DataMedics » 12.04.17, 18:08

Wanderson wrote:Source of the post What model of the HD that comes with the 701672 board?
Can you help me please


Why ask what you can just search in 2 seconds on ebay?

http://www.ebay.com/sch/i.html?_odkw=70 ... b&_sacat=0


jenny
Newbie
Posts: 10
Joined: 12.01.17
Reputation: 1 / (10)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby jenny » 30.05.17, 12:39

i tested 771.962 - 771.959 not working
Help me
Regards
Data recovery Center in Vietnam
Invited to visit : http://www.cuudulieu116.com
My Facebook is : https://www.facebook.com/cuudulieuocung

User avatar
DataMedics
Advanced user
Posts: 545
Joined: 15.12.15
Reputation: 16 / (157)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby DataMedics » 30.05.17, 20:05

Just a few questions. First off, did you swap out the ROM code? Also, are you sure there isn't a bigger issue with the drive such as failed heads? Also, are you getting a message such as "SED locked" when you try to load the utility?

The boards are compatible. So it must be something else you're missing.


jenny
Newbie
Posts: 10
Joined: 12.01.17
Reputation: 1 / (10)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby jenny » 30.05.17, 22:35

DataMedics wrote:Source of the post Just a few questions. First off, did you swap out the ROM code? Also, are you sure there isn't a bigger issue with the drive such as failed heads? Also, are you getting a message such as "SED locked" when you try to load the utility?

The boards are compatible. So it must be something else you're missing.

Yes me have transfer u12
But it does not work
Can not open power motor not spin up
help me
Regards
Data recovery Center in Vietnam
Invited to visit : http://www.cuudulieu116.com
My Facebook is : https://www.facebook.com/cuudulieuocung

User avatar
SGdata
Newbie
Posts: 28
Joined: 24.11.16
Reputation: 2 / (21)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby SGdata » 30.05.17, 23:42

Did you transfer it correctly? The right side?


Maxim_TS
Site Admin
Posts: 269
Joined: 27.03.13
Reputation: 15 / (149)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby Maxim_TS » 31.05.17, 12:50

jenny, please show us the photo of U12 chip on board
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com

User avatar
shihzur
Newbie
Posts: 6
Joined: 19.03.14
Reputation: 0 / (2)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby shihzur » 11.10.18, 14:14

800067-800065
Attachments
IMG_20181011_150124.jpg
IMG_20181011_150124.jpg (8.68 KiB) Viewed 1043 times
Data Recovery Lab in Israel
www.shihzur.co.il


Maxim_TS
Site Admin
Posts: 269
Joined: 27.03.13
Reputation: 15 / (149)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby Maxim_TS » 16.10.18, 15:01

shihzur, thank you, added into the list!
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com

User avatar
300ddr
User
Posts: 225
Joined: 18.01.12
Reputation: 3 / (25)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby 300ddr » 03.11.18, 22:39

In case anyone is interested, for the past several months I've been using a new method for converting USB to SATA. I organize all my SATA PCBs by CPU numbers (i.e. "9446") and, if applicable, ROM size (i.e. 256/512), PCB shape, and MCU(?) type (either SH or NAUT). I think there are about 20 variations for all WD USB PCBs. Second, I read USB ROM using BootRom so I can instantly see the CPU model. Then I just match any remaining variables (ROM size, PCB shape, MCU). This works 95% of the time. The other 5% that don't work after this typically requires physically moving the ROM chip from original PCB to donor (I wanna say this is just for some 9146 models, but I may be remembering incorrectly).


lcoughey
New user
Posts: 178
Joined: 12.01.12
Reputation: 6 / (56)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby lcoughey » 22.02.19, 20:20

Any suggestions for this drive?

Model: wd20smzm-59h3fs1
USB C PCB: 2060-810003-001

wd20smzm-59h3fs1-2060-810003-001.jpg
wd20smzm-59h3fs1-2060-810003-001.jpg (12.25 KiB) Viewed 173 times


Maxim_TS
Site Admin
Posts: 269
Joined: 27.03.13
Reputation: 15 / (149)

Re: List of compatible SATA PCB for 2,5" USB drives

Postby Maxim_TS » 01.03.19, 10:46

lcoughey, we didn't see such drives here in support.. Have you tried to solder SATA adapter to see if the drive allows to read SA?
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “WD USB”

Who is online

Users browsing this forum: No registered users and 0 guests