ST3500418AS still loses readiness

Moderator: Dmitriy_TS


AdasRip
Newbie
Posts: 26
Joined: 28.04.14
Reputation: 2 / (17)

ST3500418AS still loses readiness

Postby AdasRip » 16.08.17, 18:18

Hello.
I've patient ST3500418AS. Hdd starts and get at the DRD and DSC status for a fraction of a second. Next get BSY status for a few seconds and over and over again.
I can read single sector while hdd has DRD and DSC status.

Log from terminal:
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
Send Status: COMRESET seen
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
Send Status: COMRESET seen
Rst 0x10M
...


Dmitriy_TS
Site Admin
Posts: 269
Joined: 01.04.13
Reputation: 7 / (73)

Re: ST3500418AS still loses readiness

Postby Dmitriy_TS » 21.08.17, 22:52

Hello,

Try to uncheck background processes in Edit HDD ID.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


AdasRip
Newbie
Posts: 26
Joined: 28.04.14
Reputation: 2 / (17)

Re: ST3500418AS still loses readiness

Postby AdasRip » 28.08.17, 16:37

It seems that this solution has helped.
Now the hdd restarts every 1 to several minutes but it is enough to copy the sectors.
The copy speed is about 2 MB/s but well that goes.
Thank you veru much.


studiogsm
Newbie
Posts: 6
Joined: 25.10.16
Reputation: 0 / (3)

Re: ST3500418AS still loses readiness

Postby studiogsm » 14.07.18, 11:01

After uncheck all try to change in Utility status System file reading method to ATA direct and all data read in max speed. That helped for me.


Return to “Arch F3”

Who is online

Users browsing this forum: No registered users and 0 guests