RoseWood after Rom patched "Verify ALF FW signature failed"

Moderator: Dmitriy_TS


Hemendra
Newbie
Posts: 26
Joined: 20.01.15
Reputation: 1 / (13)

RoseWood after Rom patched "Verify ALF FW signature failed"

Postby Hemendra » 08.09.17, 06:45

I have detected segate rosewood 1 TB hdd.

Model : ST1000LX015-1U7172
Serial : WES29VPA
Firmware : SDM1
Capacity : 1 TB (1 953 525 168)

I can't access the SA Area.
so As per your blog I have patched the Rom.
after patched rom the hdd gives error message in terminal "Verify ALF FW signature failed". No detection, No spin.

Attached the rom file.

I doubt the bug in newer version software.

Thanks,
Attachments
ROM_WES29VPA_A89139AF.rar
(367.25 KiB) Downloaded 98 times


Arihant
New user
Posts: 115
Joined: 24.01.13
Reputation: 2 / (20)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby Arihant » 11.09.17, 11:59

Which version of pc3k you have?
Only ACE-lab can check and solved this issue. or you can try with different version pached rom.

Thanks,
Thanks,
Amit Shah
Arihant Data Recovery, India


Hemendra
Newbie
Posts: 26
Joined: 20.01.15
Reputation: 1 / (13)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby Hemendra » 11.09.17, 16:32

version 6.3.15
build 6.3.15.6463
Pl. patched the rom and send me again if you have higher or different version.


Hemendra
Newbie
Posts: 26
Joined: 20.01.15
Reputation: 1 / (13)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby Hemendra » 15.09.17, 14:22

Resolved the case, without the paching rom.

User avatar
300ddr
User
Posts: 222
Joined: 18.01.12
Reputation: 3 / (25)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby 300ddr » 29.09.17, 23:38

This probably happened because you wrote the wrong using "common" family or the wrong family. Next time, find the family code in ROM after reading, then re-enter utility using that family, then write ROM and it will succeed.


Hemendra
Newbie
Posts: 26
Joined: 20.01.15
Reputation: 1 / (13)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby Hemendra » 03.10.17, 08:20

How to identify family code from rom?

User avatar
300ddr
User
Posts: 222
Joined: 18.01.12
Reputation: 3 / (25)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby 300ddr » 03.10.17, 19:34

Open ROM, click SAP button, see highlighted characters in this pic: https://www.dropbox.com/s/9js00pwtecyltxs/sap.jpg?dl=0


Hemendra
Newbie
Posts: 26
Joined: 20.01.15
Reputation: 1 / (13)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby Hemendra » 03.07.18, 07:04

Thanks


LarrySabo
Newbie
Posts: 24
Joined: 20.07.15
Reputation: 1 / (14)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby LarrySabo » 03.07.18, 17:29

300ddr wrote:Source of the post Open ROM, click SAP button, see highlighted characters in this pic: https://www.dropbox.com/s/9js00pwtecyltxs/sap.jpg?dl=0

404
That file isn’t here anymore!

User avatar
300ddr
User
Posts: 222
Joined: 18.01.12
Reputation: 3 / (25)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby 300ddr » 03.07.18, 20:21

Here ya go Larry.
sap.jpg
sap.jpg (88.55 KiB) Viewed 504 times


Note: latest versions of PC3K show the name of the family now -- next to the family code.


LarrySabo
Newbie
Posts: 24
Joined: 20.07.15
Reputation: 1 / (14)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby LarrySabo » 03.07.18, 22:18

Thanks, Brian.

User avatar
Amarbir[CDR-Labs]
Advanced user
Posts: 671
Joined: 03.08.09
Reputation: 6 / (63)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby Amarbir[CDR-Labs] » 06.07.18, 18:32

300ddr wrote:Source of the post This probably happened because you wrote the wrong using "common" family or the wrong family. Next time, find the family code in ROM after reading, then re-enter utility using that family, then write ROM and it will succeed.


Well,
Each and every drive i have patched till today is with common utility ,The only thing i do is that in the rom capacity i enter all zeros so what it auto detects size
Regards
Amarbir S Dhillon ,CDR Labs [ Chandigarh ,India ]
DataRecovery - The Affordable Way In India
Visit - > http://www.chandigarhdatarecovery.com My Facebook - > https://www.facebook.com/chandigarhdatarecovery

User avatar
300ddr
User
Posts: 222
Joined: 18.01.12
Reputation: 3 / (25)

Re: RoseWood after Rom patched "Verify ALF FW signature failed"

Postby 300ddr » 12.07.18, 00:11

The only thing i do is that in the rom capacity i enter all zeros so what it auto detects size

What do you mean by this?


Return to “Arch F3”

Who is online

Users browsing this forum: No registered users and 0 guests