FBLITE MICROJOG AND DAC VALUES

Moderator: Maxim_TS


SLAB_TEAM0
Newbie
Posts: 6
Joined: 04.05.17
Reputation: 0 / (3)

FBLITE MICROJOG AND DAC VALUES

Postby SLAB_TEAM0 » 04.12.17, 14:37

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 256

Zone allocation table................... : HDDs RAM reading error Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 256 Kb
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 153 477
SA regions address...................... : by default
Module 02 access........................ : Granted
SA Translator loading................... : Ok

ROM Modules:
ROM version............................. : 16.7CG
ROM F/W version......................... : 0016007C
Overlay F/W version..................... : 16.7CG
Servo F/W version....................... : N0.41

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : SERVO ERROR CODE BASE SvirActSpeed
SA dir reading (ABA/CHS)................ : Module reading error: ABA 153 477(1) reading error Physical read error C/H/S: -150/0/1156 Device Error Detected: "VSC ERR KEY SECTOR MUST PRECEED DATA XFER REQUEST"
SA Access............................... : NONE

Configuration reading................... : Module ID 02 reading error Data request error Device Error Detected: "Unknown error code: 3746"

=========================================================================================================
Hi Sirs,
this log refers to a WD10JPCX-24UE4T0
Concerning to heads swap compatibility parameters and specifically to microjog analisys, microjog values, taken via Work with ROM>View ROM Information , shows "0" for all heads
Using ACE hexEdit Marvel plugin parser, the output is completely different with values that seems to be randomized and unreal.

Same results are obtained backuping SA from a working drive from the same family: microjog values all set to "0"
How should we approach such a cases? 0 is a real microjog value or ACE tool in FBLIte family is not able to correctly parse 47 module dump to extract microjog?

Besides microjog, using ACE hexEdit Marvel plugin, I see DAC values for each of four heads. No info are provided in the manual and in the blog. What is their function? Are they important compatibility params for head change?

Thank you in advance for your answers

User avatar
Amarbir[CDR-Labs]
Advanced user
Posts: 703
Joined: 03.08.09
Reputation: 7 / (73)

Re: FBLITE MICROJOG AND DAC VALUES

Postby Amarbir[CDR-Labs] » 04.12.17, 18:14

Well,
I am Also interested to know the same
Regards
Amarbir S Dhillon ,CDR Labs [ Chandigarh ,India ]
DataRecovery - The Affordable Way In India
Visit - > http://www.chandigarhdatarecovery.com My Facebook - > https://www.facebook.com/chandigarhdatarecovery


emir_has
New user
Posts: 64
Joined: 07.06.16
Reputation: 2 / (20)

Re: FBLITE MICROJOG AND DAC VALUES

Postby emir_has » 18.02.18, 20:51

Me too curently I have one patient and donor and both shows 0 in microjog editor.


Maxim_TS
Site Admin
Posts: 289
Joined: 27.03.13
Reputation: 15 / (149)

Re: FBLITE MICROJOG AND DAC VALUES

Postby Maxim_TS » 20.02.18, 13:37

emir_has wrote:Source of the post in microjog editor.

ACE developers are working on this issue, please wait for solution.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


emir_has
New user
Posts: 64
Joined: 07.06.16
Reputation: 2 / (20)

Re: FBLITE MICROJOG AND DAC VALUES

Postby emir_has » 20.02.18, 22:22

Hi

Is there any workoround for this problem??? I have one customer and time is question!

Thanks


SLAB_TEAM0
Newbie
Posts: 6
Joined: 04.05.17
Reputation: 0 / (3)

Re: FBLITE MICROJOG AND DAC VALUES

Postby SLAB_TEAM0 » 16.05.19, 17:29

Maxim_TS wrote:Source of the post
emir_has wrote:Source of the post in microjog editor.

ACE developers are working on this issue, please wait for solution.

Sorry if I resume this old post of mine.
Maxim_TS have you solved this issue in new software versions? Or anyway have you found a way to help us in donor research for these drives?
Thank you for any help.


Maxim_TS
Site Admin
Posts: 289
Joined: 27.03.13
Reputation: 15 / (149)

Re: FBLITE MICROJOG AND DAC VALUES

Postby Maxim_TS » 28.05.19, 13:34

SLAB_TEAM0, Microjog editing is still not possible for FBLite drives.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Return to “WD Marvell”

Who is online

Users browsing this forum: No registered users and 6 guests