Hitachi Headmap HDS721616PLAT80

Moderators: Maxim_TS, Filipp_TS, Garry_TS, Sergey_TS

User avatar
pclab
New user
Posts: 158
Joined: 13.11.13
Reputation: 2 / (21)

Hitachi Headmap HDS721616PLAT80

Postby pclab » 10.04.18, 18:39

Hi

I have this old Hitachi here that had a head crash and the top platter is damaged. I wanted to to a headmap on NVRAM, but after I change everything to 00 and save, it doesn’t save (after power off/on).

This models have any specifications??
Thanks
Attachments
Hitachi Headmap HDS721616PLAT80.jpg
Hitachi Headmap HDS721616PLAT80.jpg (2.18 KiB) Viewed 779 times

User avatar
Filipp_TS
Site Admin
Posts: 222
Joined: 15.04.13
Reputation: 9 / (88)

Re: Hitachi Headmap HDS721616PLAT80

Postby Filipp_TS » 10.04.18, 22:38

HEllo,

Based on this attached Image NVRAM is not in good condition.
Try to compare this NVRAM image with the donor one.
Is the donor NVRAM also has such strange Heads map?

Another thing:
If even the top platter is scratched then all other platters are scratched too in the same place.
And this place is the Service area place.
In such case useless to change Heads map or try to perform any other software tricks.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com

User avatar
pclab
New user
Posts: 158
Joined: 13.11.13
Reputation: 2 / (21)

Re: Hitachi Headmap HDS721616PLAT80

Postby pclab » 11.04.18, 09:37

Hi Filipp

I have connected also the donor PCB (I'm only connecting the PCB), and the headmap is exactly the same...
About the scratch, why couldn't it only be on the top platter?


Return to “IBM/Hitachi/HGST (Arch M24)”

Who is online

Users browsing this forum: No registered users and 1 guest