WDC WD10SDZW-11UMGS0 WHICH FAMILY

Moderator: Maxim_TS


CS DATA RECOVERY
Newbie
Posts: 31
Joined: 25.04.16
Reputation: 2 / (20)

WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby CS DATA RECOVERY » 16.05.18, 16:20

Hi ,

i have a WD My Passport 2.5" USB Drive i have converted usb to sata drive DRD DSC which family i need to select? auto not worked .


Regards
Pavan.
Attachments
5.JPG
5.JPG (5.37 KiB) Viewed 1708 times
Regards,
PAVAN KUMAR
CS DATA RECOVERY

User avatar
DataMedics
Advanced user
Posts: 528
Joined: 15.12.15
Reputation: 15 / (151)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby DataMedics » 17.05.18, 00:26

If I had to wager a guess, I'd say it's Palmer family, which is a new one. You can probably do most things you need to do using another recent family like PebbleB though.


CS DATA RECOVERY
Newbie
Posts: 31
Joined: 25.04.16
Reputation: 2 / (20)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby CS DATA RECOVERY » 17.05.18, 08:09

Thanks Data Medics

i have isolate pcb tried PebbleB then i got SED drive locked may be PC3000 not support this model & family .

Thanks
Pavan
Attachments
10.JPG
10.JPG (2.13 KiB) Viewed 1676 times
Regards,
PAVAN KUMAR
CS DATA RECOVERY

User avatar
DataMedics
Advanced user
Posts: 528
Joined: 15.12.15
Reputation: 15 / (151)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby DataMedics » 17.05.18, 19:11

Did you attempt the ROM preparation? Perhaps it's the same SED scheme.


Maxim_TS
Site Admin
Posts: 251
Joined: 27.03.13
Reputation: 15 / (146)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby Maxim_TS » 22.05.18, 09:43

CS DATA RECOVERY wrote:Source of the post then i got SED drive locked may be PC3000 not support

you are right, such drives are SED locked in ROM and have a lot of another different issues. They are not supported in PC-3000 for now.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Doomer
Newbie
Posts: 45
Joined: 24.06.14
Reputation: 2 / (20)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby Doomer » 12.06.18, 21:40

It's a Palmer drive (other Palmer drives Y0TS, Z10T, UMGS, EW0T)
Palmer drives are locked differently comparing to previous SED families.
Palmer drives are not supported by PC3K(including unlocking procedure), but you can outsource such drives to people who can do them.


vijayan
Newbie
Posts: 23
Joined: 27.04.16
Reputation: 1 / (14)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby vijayan » 28.09.18, 09:57

Model : WDC WD10SDZW-11UMGS0
Serial : WD-WXH1A67DN0KV
Firmware : 01.01A01
Capacity : 1 000 GB (1 953 459 632)



SA HDD has unknown capacity. SA CHS access may operates wrongly
HDD Info reading........................ : Ok
Heads number............................ : 2
Cyl Count............................... : 512

Zone allocation table................... : Ok
SA SPT.................................. : 1944

ROM:
Read ROM................................ : HDDs ROM reading error Data request error Device Error Detected: "SED DRIVE LOCKED"

Service area:
SA dir reading (ID)..................... : SED DRIVE LOCKED
SA dir reading (ABA/CHS)................ : Dir reading error ABA 0(1) reading error Device Error Detected: "SED DRIVE LOCKED"
SA Access............................... : Copy 0,Copy 1

Configuration reading................... : Module ID 02 reading error Data request error Device Error Detected: "SED DRIVE LOCKED"

Reading modules
Into folder............................. : <HDD Profile>\Data\Modules\



HOW TO FIX PROBLEM

1HOW TO SA COPY
2.HEAD MAP

????
Attachments
WDC WD10SDZW-11UMGS0.JPG
WDC WD10SDZW-11UMGS0.JPG (6.58 KiB) Viewed 1114 times
Best regards,
vijayan MBA
RDR DATA RECOVERY
http://www.raminfotechdatarecovery.com
call 7092114411/22
sky:raminfotech.vijayan
whatup:9841983643 / 46


Maxim_TS
Site Admin
Posts: 251
Joined: 27.03.13
Reputation: 15 / (146)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby Maxim_TS » 01.10.18, 11:34

vijayan, these drives are still unsupported in PC-3000. It's not possible neither to build head map nor to get SA access now. ACE is working on it now, hopefully they will find the solution.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com

User avatar
cuumaytinh
New user
Posts: 51
Joined: 19.08.13
Reputation: 2 / (19)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby cuumaytinh » 15.10.18, 10:24

is it support ?


Maxim_TS
Site Admin
Posts: 251
Joined: 27.03.13
Reputation: 15 / (146)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby Maxim_TS » 16.10.18, 17:23

cuumaytinh wrote:Source of the post is it support ?

it's PC-3000 forum where all PC-3000 users can discuss different issues related to data recovery. If you want to contact Technical Support department, please follow https://ts.acelaboratory.com
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com

User avatar
Amarbir[CDR-Labs]
Advanced user
Posts: 684
Joined: 03.08.09
Reputation: 7 / (67)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby Amarbir[CDR-Labs] » 04.11.18, 08:42

Hi Maxim,
How Are You Today ,When Do You Think Will Pebblep , Spyplass ,Palmer Etc Be Supported For Proper Working In PC 3000
Regards
Amarbir S Dhillon ,CDR Labs [ Chandigarh ,India ]
DataRecovery - The Affordable Way In India
Visit - > http://www.chandigarhdatarecovery.com My Facebook - > https://www.facebook.com/chandigarhdatarecovery

User avatar
cuumaytinh
New user
Posts: 51
Joined: 19.08.13
Reputation: 2 / (19)

Re: WDC WD10SDZW-11UMGS0 WHICH FAMILY

Postby cuumaytinh » 10.01.19, 13:19

for V6.5 pc3000 is supported Pebblep , Spyplass but Palmer is not yet.


Return to “WD Marvell”

Who is online

Users browsing this forum: No registered users and 0 guests