not supported or fake ID ?? 0xDED9CA58 42ECDED9

Questions about different pinouts, scheme of soldering and required equipment

Moderators: Roman_TS, Dmitriy_TS, Filipp_TS


goooz
Newbie
Posts: 22
Joined: 30.04.12
Reputation: 1 / (12)

not supported or fake ID ?? 0xDED9CA58 42ECDED9

Postby goooz » 29.08.18, 10:37

8GB microSD with Spider Tool

I've got this ID = 0xDED9CA58 42ECDED9 (16-bit ONFI)

Who knows, is it real or not? Only ECD sounds good.


AJ2008
Posts: 1325
Joined: 25.11.08
Reputation: 10 / (101)

Re: not supported or fake ID ?? 0xDED9CA58 42ECDED9

Postby AJ2008 » 29.08.18, 11:12

I would guess there is issue with contact between needles on spider board and signals on card or map you have is not perfectly correct. check all contacts are good and re-check ID again. what device is this?

User avatar
arvika
Newbie
Posts: 45
Joined: 14.10.09
Reputation: 2 / (20)

Re: not supported or fake ID ?? 0xDED9CA58 42ECDED9

Postby arvika » 27.09.18, 22:45

AJ2008 is correct. On PC3K reader is quite common for monoliths. One byte shifted to the left.


Return to “Monolithic devices recovery”

Who is online

Users browsing this forum: No registered users and 0 guests