how to setup com connection to WD10JMVW

Moderator: Maxim_TS


Paulfromsurrey
Newbie
Posts: 12
Joined: 18.06.18
Reputation: 0 / (0)

how to setup com connection to WD10JMVW

Postby Paulfromsurrey » 18.09.18, 22:59

I just received this hard drive for data recovery and drive is not being recongnized by pc3000 or deepspar

Here is the information about this drive

WD10JMVW-11AJGS4
It is 1 tb Drive

I believe the family for this drive is based on this information i found on another website

FBlite

WD FBlite family and its models:

WDC WD10JMVW-11AJGS2
WDC WD10JMVW-11AJGS0
WDC WD10JMVW-11AJGS3
WDC WD10JPVX-00JC3T0
WDC WD10JPVX-22JC3T0
WDC WD5000BMVW-11AJGS0
WDC WD5000BMVW-11AJGS2
WDC WD10JPVX-08JC3T5

when we tried to run utility it is giving me techno key error

Please let me know how
Paul
PcPluscomputing.com
Computer Repair and Data Recovery Services in Surrey,bc


AJ2008
Posts: 1319
Joined: 25.11.08
Reputation: 10 / (101)

Re: how to setup com connection to WD10JMVW

Postby AJ2008 » 19.09.18, 09:47

These are much easier to work when converted to SATA - I would recommend diagnosing over SATA first.


Paulfromsurrey
Newbie
Posts: 12
Joined: 18.06.18
Reputation: 0 / (0)

Re: how to setup com connection to WD10JMVW

Postby Paulfromsurrey » 19.09.18, 16:56

Where I can find compatible pcb board information

WD10JMVW-11AJGS4
WD PCB BOARD IS 2060-771961 001 REV B
Paul
PcPluscomputing.com
Computer Repair and Data Recovery Services in Surrey,bc


AJ2008
Posts: 1319
Joined: 25.11.08
Reputation: 10 / (101)

Re: how to setup com connection to WD10JMVW

Postby AJ2008 » 19.09.18, 17:28



Paulfromsurrey
Newbie
Posts: 12
Joined: 18.06.18
Reputation: 0 / (0)

Re: how to setup com connection to WD10JMVW

Postby Paulfromsurrey » 19.09.18, 17:49

Thank for the information so I Can just ignore the Rev information



so in this case
PCB BOARD IS 2060-771961 001 REV B = 2060-771960 Rev could be any number
=2060-771959
=2060-771939
Paul
PcPluscomputing.com
Computer Repair and Data Recovery Services in Surrey,bc


Paulfromsurrey
Newbie
Posts: 12
Joined: 18.06.18
Reputation: 0 / (0)

Re: how to setup com connection to WD10JMVW

Postby Paulfromsurrey » 20.09.18, 01:42

I was able to find the sata board and changed the rom chip and lets see if can work

drive spin ok but does not come to ready state
one time it shows all the make and model and serial no

most of the time it stay busy can not identify family

any help
Paul
PcPluscomputing.com
Computer Repair and Data Recovery Services in Surrey,bc


Maxim_TS
Site Admin
Posts: 255
Joined: 27.03.13
Reputation: 15 / (146)

Re: how to setup com connection to WD10JMVW

Postby Maxim_TS » 24.09.18, 17:32

Paulfromsurrey, follow this manual: http://blog.acelaboratory.com/pc-3000-h ... oblem.html
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelaboratory.com


Paulfromsurrey
Newbie
Posts: 12
Joined: 18.06.18
Reputation: 0 / (0)

Re: how to setup com connection to WD10JMVW

Postby Paulfromsurrey » 27.01.19, 06:13

Thanks Max I was able to recover all my data

Paul
PcPluscomputing.com
Computer Repair and Data Recovery Services in Surrey,bc
Paul
PcPluscomputing.com
Computer Repair and Data Recovery Services in Surrey,bc


Return to “WD USB”

Who is online

Users browsing this forum: No registered users and 1 guest