Seagate constellation ES 2TB

Moderator: Dmitriy_TS


jugs
Newbie
Posts: 3
Joined: 20.12.18
Reputation: 0 / (0)

Seagate constellation ES 2TB

Postby jugs » 03.01.19, 10:14

Hi

I got a Seagate constellation ES 2TB with board issue , i replaced the pcb with rom swap. now is the hdd is detected but it shows no partition . when tried scanning in R-studio no files were found.
When i see the 0 sector it shows as pic attached.

when the drive is connected to the terminal it shows message encrypting in terminal.

is it some sort of encryption ? i asked the customer whether he used any encryption he says no.

looking for suggestion
Attachments
terminal.PNG
terminal.PNG (14.16 KiB) Viewed 56 times
mbr.PNG
mbr.PNG (33.43 KiB) Viewed 56 times


AJ2008
Posts: 1318
Joined: 25.11.08
Reputation: 10 / (100)

Re: Seagate constellation ES 2TB

Postby AJ2008 » 03.01.19, 10:51

Was patient or donor (or both) SED drives?


jugs
Newbie
Posts: 3
Joined: 20.12.18
Reputation: 0 / (0)

Re: Seagate constellation ES 2TB

Postby jugs » 03.01.19, 11:06

donor is not a SED drive but i dont know about the patient sir

but i can able to read sys files ,rom modules all after pcb swap on patient drive.
Attachments
A4B8B17B-186C-4C5C-8A60-D73F41CE116A.jpg
patient drive
A4B8B17B-186C-4C5C-8A60-D73F41CE116A.jpg (10.03 KiB) Viewed 47 times
8DF37FED-4ECB-4116-B2F6-A7A00B089E1C.jpg
patient pcb
8DF37FED-4ECB-4116-B2F6-A7A00B089E1C.jpg (13.83 KiB) Viewed 47 times


jugs
Newbie
Posts: 3
Joined: 20.12.18
Reputation: 0 / (0)

Re: Seagate constellation ES 2TB

Postby jugs » 03.01.19, 11:13

here is the donor hdd pcb and label
Attachments
front.jpg
donor
front.jpg (10.96 KiB) Viewed 47 times
pcb.jpg
donor pcb
pcb.jpg (11.83 KiB) Viewed 47 times


Return to “Arch F3”

Who is online

Users browsing this forum: No registered users and 0 guests